Tenders Are Invited For Emergency Supply Of Butterfly Valve Dn500

Tenders Are Invited For Emergency Supply Of Butterfly Valve Dn500 For Tse Destribution Network Dumistan Area 1 Closing Date 20-02-2022 Opening Date 21-02-2022 1 Supply Of Flange Adaptor; Size Dn500 Pn16; Installation Range Is For Dn500 Pn16 Ductile Iron (Di) Pipe; Flange Drilling To Bs En 1092-1 Pn16; According To Iso 2531; According To Bs En 598; Body & End/Follower Ring Materials-Ggg50/ En-Gjs-500-7; Sealing Ring Materialepdm; All Fasteners Material (Bolt/Nut/Washer)-Ss316/ A4; Protective Coating, F.B.E.-Blue; Mfr. Avm®/ Avk®/ Viking Johnson® Ea 4 2 Supply Of Butterfly Valve Double-Eccentric - Size Dn500 Pn16; Resilient Seated (Epdm) According To En 593; Faceface Length 350 Mm To Pn16 En 593 (Long Pattern) (Din 3202 F4)/ Basic Series 14: En558-1; Valve Body & Disc Materials-Ggg50/ En-Gjs-500-7; Valve Seat, Stem/Spindle, Seat Retainer Ring And All Fasteners Materials, Ss316/A4; Weld-On Ss316 Body Seat; Flanges Drilling To Bs En 1092-1 Pn16; Bolt Hole Diameter & Nos. 33 Mm X 20 Nos.; Manual Operating Gearbox With Valve Position Indicator; Clockwise To Close; Handwheel Operation; Protective Coating, F.B.E.-Blue Wras; Mfr. Avm®/ Avk®/ Viking Johnson® Ea 4 3 Butterfly Valve Double-Eccentric - Size Dn500 Pn16; Resilient Seated (Epdm) According To En 593; Face-Face Length 229 Mm To Pn16 En 593 (Short Pattern) (Bs 5155)/ Basic Series 13: Bs 5155; Valve Body & Disc Materials-Ggg50/ En-Gjs-500-7; Valve Seat, Stem/Spindle, Seat Retainer Ring And All Fasteners Materials, Ss316/ 1.4401; Weld-On Ss316 Body Seat; Flanges Drilling To Bs En 1092-1 Pn16; Bolt Hole Diameter & Nos. 33 Mm X 20 Nos.; Operating Gearbox With Valve Position Indicator; Clockwise To Close; Handwheel Operation; Protective Coating, F.B.E.-Blue Wras; Mfr. Avm®/ Avk®/ Viking Johnson® Ea 3 How To Participate? Those Who Are Capable And Wish To Participate In The Above Tender Are Able To Get The Tender Documents Online Through The Internal Tender Services Ministry Of Works, Municipalities Affairs And Urban Planning (Works Affairs) Website Or The Bahrain E-Government (Https://Www.Bahrain.Bh) Starting From Advertising Date. Contractors Should Have A Valid Qualification License And Registered With Cost Engineering Directorate In The Ministry Of Works, Municipalities And Urban Planning And Have Commercial Register In The Same Field. (Only For Contractors And Projects Listed By The Category Mentioned Above. The Tender Is Subject To The Provisions Of The Tender Law Issued By The Legislative Decree No. 36 Of 2002, Its Amendments, And Its Implementing Regulations Issued By The Decree No. 37 Of 2002. As Per The Cabinet Edicts No.S (6-2416) Of 2017 And ( 4-2516) Of 2019 , Registered SmeS Will Be Offered A Preference Of 10% In Tenders And Auctions Related To Service Utilities Inside Purchasing Authority Premises. In Case There Is Another Applicable Preference Percentage ,The Higher Of Them Will Be Offered To Smes. The Bids Should Be Deposited In The Tender Box At The Tender Unit At 6Th Floor New Building, Ministry Of Works Municipalities Affairs And Planning As Per The Above Mentioned Date. Tenders Shall Be Submitted In One Envelope. In Addition, These Conditions Have To Be Considered: O Unit Price And Total Amount With 10% Vat(As The Case May Be) In Bd. Shall Be Shown Against Each Quoted Item. O Enclose Copy Of A Valid Commercial Registration Certificate (Cr) In Line With The Tenders Subject. O Enclose Copy Of A Valid Certificate Of Compliance With The Employment Percentages For Bahraini Manpower (Bahranization Certificate) Issued By Ministry Of Labour. O All Documents Submitted As Part Of The Bid Must Be Stamped With The CompanyS Stamp. Tenders Shall Remain Valid For 180 Days From The Closing Date. The Ministry Reserves The Right To Accept Or Reject All Or Part Of A Tender. Any Bid That Dose Not Meet The Above Conditions Will Be Rejected In Addition To The Conditions Specified In The Tender Documents. This Advertisement Is Considered Supplementary To The Tender Documents.