Tenders Are Invited For Fejér County Design Of Bicycle Paths

Modification Of A Contract/Concession During Its Term: Fejér County Design Of Bicycle Paths Architectural, Engineering And Planning Services Short Description: 4. Designing Cycling Facilities Between Mór-Pusztavám Settlements To Identify A Design Venue: Start Of Design Phase: Mór, Kisses Road, Railway Gateway End Of Design Phase: Pusztvám, Youth Street, Kossuth Lajos Street (8127 Connecting Road) Nature Reserve Control: None Full Length: ~ 6.0 Km Short Text Description Of The Design Site: The Planned Trail Is Based On The Abandoned Railway Line Of The Former Moorish-Bullet. The Relevant Railway Line Is In The Treatment Of Máv. The Extraction Of The Existing Railway Track Is In Progress. The Starting Point Of The Section Is A Kissing Pathway Gateway, The Planned Trail Is Linked To The Mooring Bicycle Path. The Location And Long-Term Design Of The Railway Line Is A Good Basis For The Outskirts Bicycle Path Connecting The Two Settlements. At The Southern Border Of The Mullet, The Railway Line Crosses The Connecting Path 8127 And Turns To The Eastern Direction. The Planned Bicycle Path Is Detached At This Point From The Railway Track And Leads To The Interior Part Of The Settlement In Parallel With The National Utensil. Presentation Of A Bicycle Trail: - The Trail Starts From The Former Railway Passage Of The Kisses. The Bicycle Path Is On The Existing Railway Filling In The Direction Of Mooring To Moors Belt Area. The Bicycle Path Comes From The Railway Trail Before The City Border And The Existing Railway Gateway. The 8127 J. Connecting The Cycling Passage Should Be Formed In A Populated Area With Public Lighting. - Between The Village Passes The Bike Path On The Railway Embankment Again Until It Reaches The Existing Rail, Road Intersection Before Pusztavám. From Here, The Bicycle Path Can Be Moved In Parallel To The Nationwide Public At The Bunk. - Within The Puszta, Cycling Traffic Can Be Imported Into The Settlement Center On The Eastern Side Of The Connecting Road 8127. Bridges And Artworks: In The Case Of Crossroads Crossing, A New Artifact (Bridge) Or Crossing The Watercourse Data From The Operator Is Required. Permission In The Event Of A Design Of A Work, The Acquisition Of The Necessary Permissions And Approvals Is The Task Of The Designer. Water Construction The Drainage Of The Bicycle Path Is To Be Designed Under The Conditions Set Out In The General Chapter And On The Basis Of The Relevant Road Technical Specifications. Nodes, Road Connections, Road Crossings, Railway Gateways During The Work, They Need To Investigate Road Junctions, Their Connection To The Bicycle Path. Traffic Analysis Must Be Certified To Show How The Passages, Crossings, If Necessary, The Method Is Defined In The Policy. Type Of Buyer: Regional Or Local Authority Type Of Contract: Services Type Of Procedure: Open Procedure Regulation: European Union Type Of Bid: Not Applicable Award Criteria: Not Applicable [Disclaimer: The Above Text Is Machine Translated. For Accurate Information Kindly Refer The Original Document.]