Tenders Are Invited For Company services specializing in the supply and installation of living room divisions and divisional doors, as well as linds, to e Installed in the dependies of the new headquarters of the National Penitencial Department

1 Installation Partition Removal Panel Shutter window door miter generally Supply Service and MODEL PANEL Installation Type 1: Floor lind panel to the roof Composition: two plates MDF, minimum modulation 1000 mm and maximum 1250 mm, one fixed and one removale mounted structure formed y profiles aluminum extruded coating: melamine of low pressure (P) at the two sides of each plate and PVC edge ands on the plates contoured The plate may e whole or sectioned, depending on the situation Kernel: attenuating acoustic (rock wool or glass, density of not less than 40 kg m3) Color defining the contractor dimensions: height = right foot 2400 mm to 3200 mm Minimum width modulation = 1000 mm and 1250 mm or according to convenience (finishing supplements) Minimum thickness = 90 mm, consisting of plates 15 mm Show certificate of conformity issued y ANT Note: only for the finishing plates or addition will e allowed other unusual medidasTratamento: Aplicailidade Decree 7174: Aplicailidade Preference margin: NãoQuantidade: 2400Unidade supply: QUADRADO2 METRO Installation partition Removal Panel Shutter window door miter generally supply Service and MODEL PANEL Installation Type 2: floor lind panel up to 1100 mm high, plus doule and linds glass to the height of the door and lind flag to the ceiling Composition: two lind MDF oards, minimum modulation of 1000 mm and 1250 mm, with one fixed and one removale 6 mm crystal glass, doule with shutter, mounted structure formed y extruded aluminum profiles covering: low pressure melamine (P) on oth sides of each plate and PVC tape edge contours in Crum plates of: attenuating acoustic (rock wool or glass, density of not less than 40 kg m3) Color defining the contractor dimensions: height = right foot 2400 mm to 3200 mm Minimum width modulation = 1000 mm and 1250 mm or according to convenience (finishing supplements) Minimum thickness = 90 mm, consisting of plates 15 mm Show certificate of conformity issued y ANT Note: only for the finishing plates or addition will e allowed other unusual medidasTratamento: Aplicailidade Decree 7174: Aplicailidade Preference margin: NãoQuantidade: 300Unidade supply: QUADRADO3 METRO Installation partition Removal Panel Shutter window door miter generally supply Service and Installation MODEL PANEL Type 3: doule lind panel floor to ceiling Composition: four plates MDF, modulation minimum 1000 mm and 1250 mm, two fixed and two removale mounted structure formed y aluminum extruded profiles covering: melamine of low pressure (P) at the two sides of each plate and PVC edge ands in the contours of the plates plate may e sectioned or whole depending on the situation Crum: acoustic dampening (rock wool or glass, den sity of not less than 40 kg m3) Color defining the contractor dimensions: height = right foot 2400 mm to 3200 mm Minimum width modulation = 1000 mm and 1250 mm or according to convenience (finishing supplements) Minimum thickness = 180 mm, consisting of plates 15 mm Show certificate of conformity issued y ANT Note: only for the finishing plates or addition will e allowed other unusual medidasTratamento: Aplicailidade Decree 7174: Aplicailidade Preference margin: NãoQuantidade: 120Unidade supply: QUADRADO4 METRO installation Dividing Removal panel Shutter window door miter groups supply and door installation template P1: width = 800 mm x 2100 mm and lind flag to the set height for installation dividing door and flag massive, made of sheet MDF, with 1 mm thick, in the same finish of the door, including all necessary hardware (stops, lock La Source 610 ST2 55ROS Al or similar, hinges, etc) port and flag should receiving melamílico laminate, smooth and seamless, following the same standard of finish of the partition panels or Crum color to e defined y the contractor: attenuating acoustic (rock wool or glass density of not less than 40 kg m3) Standard finishing equal to the dividing, differentiated according existenteTratamento model Aplicailidade Decree 7174: Aplicailidade Preference margin: NãoQuantidade : 85Unidade supply: UNIDADE5 installation Dividing Removal panel Shutter window door miter groups supply and door installation template P2: width = 800 mm x 2100 mm and lind flag to set to installation height partition type 3