Tenders Are Invited For Pressure Parts Headers Cap Cutting

Quotation Are Invited For Pressure Parts Headers Cap Cutting. Hrsg- 72 Pressure Parts Heade 1032200045Rfx Description Hrsg- 72 Pressure Parts Headers Cap Cutting ;Contact Person: Nadeem Anjum / [email protected] / 04-81-40678 / +971509124804 1 Item-00001 Scope Of Work For Hrsg- 72 Pressure Parts Headers Cap Cutting For Tubes Internal Inspection Title: Hrgs 72 Top & Bottom Header Ins Pection Caps Cutting, Removal & Welding. Size: Od: 60.3 Mm. Quantity: 30 Nos, Refer To Below Table For Detail. 1.#Contractor Scope Of Work ##Contractor Shall Visit The Site, Review The Drawings And Make Himself Fully Aware With The Scope, Plant Access, Faciliti Es, Work Duration, Shutdown Schedules, Facilities, Complexities, Safety Measures Etc., Before Submitting The Quotation. ##Party Shal L Submit Itp, Method Of Statement Along With Wps, Pqr And Ndt Plan After Getting Po And Before Commencing Of Work (Itp Shall Includ E The Section/Header/Tube Number To Be Inspected) ##Weld Joints To Be Made By Qualified Welder According To Applicable Wps & Asme Re Quirements. (Wps & Welder Quality Test Certificates/ Pqr To Be Provided Prior To Start Of The Job) ##To Get A Ptw Contractor Has To Submit Risk Assessment Forms And Method Statement Prior To Start The Work. ##Check Condition Suitable To Carry Out Work. Conduct Sit E Survey And Safety Inspection To Assess The Working Environment. ##Daily Safety Meeting Shall Carry Out To Evaluate The Risk Involv Ed In Methods To Be Used. Risk Assessment And Toolbox Talk To Be Given To The Employees. ##Party Shall Mobilize The Labor, Equipment , Tools, Etc. Immediately After Dewa Notification. Party Shall Ready To Start The Work With One-Day Advance Notification. ##Identify And Mark The Specific Section/Header/Cap To Cut Along With Dewa Representative As Per Approved Itp. ##Mark, Cut And Remove The Thre Ad Of The Inspection Cap And Keep The Cap Firmly Identified Without Any Damage (Caps Shall Remove In A Way To Re-Use Them). ##Sample S Found If Any From Removed Nozzles Or From Inside The Header/Tube Shall Be Collected And Handed Over To Dewa With Proper Identifica Tion Of Header. Sample Shall Be Collected With Utmost Care To Avoid Mixing Of The Same With Any Foreign Materials. ##Prepare/Smoothe N The Surface Of Inspection Nozzle And Header To Avoid Any Damage/Injuries During Borescope Inspection (Dewa Will Arrange The Boresc Ope Inspection). ##After Final Clearance From Dewa, Fit Up The Caps Back To The Header. Proper Inspection Shall Be Done To Confirm T Hat No Loose Materials Are Left Inside The Header. ##Clean The Male And Female Thread Thoroughly. ##Tight The Inspection Caps. ##Wel D The Nozzle Joints As Per Approved Wps. ##Pwht Inspection (Pwht Shall Be Under Dewa Scope) Of Nozzle Joints As Per Itp ##Removal Of All Metal Scraps, Temporary Supports And Any Other Scraps From Workplace And Disposal As Per Dewa Engineer Instruction. ##Housekeep Ing # Workplace And Downside Areas. ##Inspection And Approval From Dewa Personnel. ##De-Mobilization And Site Clearance. ##Upon Work Completion, Detailed Inspection Report Shall Submit. Report Shall Include Header/Tube Identification Details, Photos, Wps, Itp, Wel D Consumable Certificates, Welder Certificate (Pqr), Warranty For 1 Year And All Supporting Documents. 2.#Quantity Of Inspection Details Of Each Cap With Material Given In Below Table. 3.#Duration And Schedule Of Work Duration Of The Work For Each Hrsg Unit Sh All Be 05 Days (Upon Prior Approval From Dewa, Contractor May Have To Work On 24 Hrs. Shift) Tentative Shutdown Start Date Of Unit Given Below, Hrsg# 72#- Starts From 25/02/2022## 4.#Dewa Scope Of Supply ##Ndt ##Pwht ##Scaffolding If Required ##Insulation Mate Rial If Required 5.#Warranty ·#A Minimum Warranty Of 12 Months For Weld Joints And Workmanship Shall Provide By The Contractor Star Ting From The Date Of Final Clearance From Dewa. ·#In Case Of Any Damage/Defect Of The Work Carried Out Under This Contract Within T His Warranty Period, The Contractor Shall Attend And Carry Out The Necessary Repair Work And Rectify The Defect Within Short Period Without Affecting The Production Of Electricity And Water. General Terms & Conditions Technical Safety During The Work: ·#Contrac Tor Staff Must Have Valid Gate Pass Before Entering The Plant Premises. ·#Contractor Shall Give Daily Tool Box Talk, Risk Assessment And Dynamic Risk Assessment To Their Staffs. ·#Contractor Staff Involved In Any Activity Shall Confirm The Availability Of Line Cle Arance (Lc) And Permit To Work (Ptw) Before Start Of Any Work. ·#Contractor Staff Must Check And Verify Of The Isolations Before Sta Rting Of Any Overhauling Work. ·#The Contractor Shall Check The Condition Suitable To Carry Out The Work. Conduct Site Survey And Sa Fety Inspection To Assess The Working Environment. ·#Contractor Shall Ensure 30 Ea Standard Terms & Conditions 1) Prices Should Be Ddp Delivery Duty Paid At Dewa Stores. 2) Quotation To Be Submitted Only In Local Currency U.A.E Dirhams 3) Dewa Standard Payment Terms Is 30 Days Credit From The Date Of Acceptance Of Material 4) No Dewa Staff Or His Or Her Relatives Up To Third Degree Should Have Ownership Or Partnership In Your Company, And Your Participation In Dewa Tenders / Rfqs Should Not Constitute A Conflict Or Perceived Conflict Of Interest.