Common Market for Eastern and Southern Africa, COMESA,African Union
11-08-2021
Work Detail
Tenders are invited for Repair and Supply of Skip BinsCAPACITY 5 5 m3BIN OVERALL SIDES FLOOR BACK AND FRONT The skips should be of the design where all the corners are folded for extra strength The skips should also have designed to work in unison with a Rear Loader Compactor orskip loading units The complete bin including the floor should be manufactured from 4 5mm mild steel plate All corners of the bin should be folded over to mate with the other plate The folded edge should be positioned to provide the strength where required The bottom of the front back plates should be folded under the floor for extra support The front and back plates are also folded to prevent the sides from opening The side plates should have a folded channel welded along the top edge with an extra fold facing down into the bin for extra strength The upper edge of the back plate should be strengthened with a deep pressed channel section to cater for the stress when picking up and tipping the bins It should also have a 20mm winch hook welded to the channel for top winch compactor operation The front panel upper edge incorporates a 50mm hinge bar extending across the full width of the bin 1980mm long for compactor operation Each of the four inner corners are fitted with gussets for additional strength and prevent cracking in this area FLOOR The floor should be pressed with an IBR PROFILE over its full length and an angle pressingup on the sides whereby the side plates are held into place thus stopping the side platesfrom ballooning open The floor when fitted to the bin is supported by the fold on the front and back plates Four 4 forged lifting lug pins should be fully welded to the sides of the bin prior to assemblyand then welded to the vertical channel support members to give extra strength TIPPING BAR A tipping bar should be manufactured from 40mm round bar supported by an 8mm thick pressed plate fitted to the bottom edge of the front and back sloping panel Weep holes be provided on all corners of the skip to prevent stagnation of water in skip The base be reinforced and ribbed to prevent waste sticking to the base COLOUR Fire resistant Municipal Council of Manzini Colours Dark green and yellow Gold
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
