Request For Quotation Service For Certification Of Electrical Personnel Of An Enterprise For Electrical Safety (2Nd Group Of Approval)

Diagnostics:Inspection Of The Body, Mechanism, Pendulum, Weights; Checking The Clock, Chime, Melody; Detecting Wear Of Axles, Bushings, Gears; Checking Cables/Chains, Drums, Anchor Runs; Lubricant Condition Assessmentdisassembling The Mechanism:Removing The Pendulum And Weights;Removing The Mechanism From The Case;Complete Disassembly Of The Clock Mechanism, Strike And Melody.Cleaning And Washing Parts:Removing Old Grease And Contaminants;Washing Parts In A Special Hourly Solution Or Ultrasonic Bath;Drying And Visual Inspection Of Parts After Cleaning.Repair And Restoration:Replacement Or Restoration Of Worn Bushings (Bushing Of Platins); Polishing And Straightening Of Axes;Repair Or Replacement Of The Escape Wheel And Anchor; Restoration Of Gear Teeth (If Necessary); Repair Of Drums, Cables Or Chains; Replacing Worn Springs (If Applicable)Assembly And Lubrication:Assembling The Mechanism In The Correct Sequence;Lubrication Of All Operating Points With Special Watch Oils;Adjustment Of Gears And Freedom Of Movement.Adjustment And Setting:Setting Up The Anchor Run;Adjusting The Exact Stroke (On The Pendulum)Setting Up The Battle And Melody (Synchronization With Time Indications)Checking Smoothness And Power Reserve.Check In Operation:Trial Run;Control Of Work Within Several Dayscorrection Of Accuracy And Combat After The Runfinal Installation:Installing The Mechanism Into The Housingaligning The Clock By Levelfinal Adjustment Of The Pendulum And Weights