Request For Quotation Purchase Of Medical Products

Medical Equipment, Instruments, Devices, As Well As Surfaces Of Sanitary Equipment In Medical Organizations, Intended For Final And Preventive Disinfection. Liquid Disinfectant In Concentrated Form Or Ready To Use. The Active Ingredients Must Contain A Combination Of Quaternary Ammonium Compounds (Qacs), Tertiary Alkylamines (Amines) Or Polyhexamethylene Guanidine To Ensure A Prolonged Antimicrobial Effect. It Has Good Cleaning And Deodorizing Properties, Does Not Damage Treated Surfaces, Does Not Change The Color Of Fabrics, And Does Not Cause Corrosion Of Metals. After Surface Treatment Does Not Require Rinsing. Refers To Low-Hazard Substances. Volume Of At Least 1 Liter, In Dense Polymer Canisters With A Sealed Lid And First Opening Control. Must Be Clearly Labeled In Kazakh And Russian Indicating The Composition, Precautions, Rules For Preparing Working Solutions And Expiration Date., Antiseptic. Intended For Hygienic Treatment Of The Hands Of Medical Personnel, Treatment Of The Hands Of Surgeons And Persons Involved In Surgical Interventions, As Well As For Disinfection Of The Skin Of Injection And Surgical Fields Of Patients In Medical Organizations. Ready-To-Use Liquid Alcohol-Containing Antiseptic. The Active Ingredients Should Contain Isopropyl Alcohol Or Ethyl Alcohol, As Well As Chlorhexidine Bigluconate As A Component That Provides A Prolonged Action. The Total Alcohol Content Must Be At Least 60–70% To Ensure Virucidal, Bactericidal And Fungicidal Effects. The Exposure Time For Hand Hygiene Should Be No More Than 30 Seconds. The Product Should Contain Functional Additives That Soften And Moisturize The Skin To Prevent Dryness And Irritation With Frequent Use. The Product Should Not Have A Local Irritant, Skin-Resorptive Or Sensitizing Effect. Plastic Bottles With A Volume Of At Least 1000 Ml With A Tight-Fitting Cap, Compatible With Standard Pump Or Elbow Dispensers. Availability Of Clear Labeling In Kazakh And Russian Indicating The Composition, Purpose, Precautions And Expiration Date., Designed For Lubricating Medical Instruments (Catheters, Enema Tips, Gas Tubes) Before Their Introduction Into The Patients Body, As Well As For Softening The Skin And Protecting Against Friction During Therapeutic And Diagnostic Procedures. It Is A Homogeneous Odorless Ointment-Like Mass, From White To Yellowish-White. When Applied To The Skin, It Forms An Even, Thin Film That Is Not Absorbed Into The Deep Layers Of Tissue. It Has High Hydrophobic And Lubricating Properties, Is Chemically Inert, And Does Not Have An Irritating Or Toxic Effect On Mucous Membranes And Skin. Sterile. Packaged In Sterile Primary Packaging In Aluminum Tubes With A Volume Of At Least 25 G. Each Unit Of Product Must Be Clearly Labeled In Kazakh And Russian With The Obligatory Indication Of The Name, Manufacturer, Batch Number, Date Of Manufacture And Expiration Date., Designed To Maintain Sanitary And Hygienic Standards, Protect Examination Couches, Gynecological Chairs, Operating Tables And Massage Tables From Contamination, As Well As To Ensure Individual Hygiene Of Patients During Examinations And Medical Procedures. Single Use. Made Of Non-Woven, Hypoallergenic, Breathable, Soft Material (Spunbond Or Sms), Resistant To Tearing In Dry And Wet Conditions. The Density Of The Material Is At Least 15-20 G/M². The Sheet Size Is At Least 70X200 Cm. They Have Good Barrier Properties Against Microorganisms And Do Not Cause Skin Irritation Or Electrostatic Stress. Release Form: Folded In Packs (Pieces In A Package) Or In Rolls (With Or Without Perforation - Specify The Desired Option). Non-Sterile. Supplied In Durable, Sealed Original Packaging That Protects The Product From Contamination, Dust And Moisture., Designed For Subcutaneous, Intramuscular And Intravenous Administration Of Drugs, As Well As For Suction Of Various Fluids From The Body. Single Use. 3-Component (Cylinder, Piston And Seal/Lip For Maximum Smoothness And Precise Dosing Without Jerking). At Least 5 Ml (Extended Graduation Up To 6 Ml Is Welcome For The Convenience Of Drug Collection). Coaxial (Located In The Center Of The Cylinder) Tip Position. Cylinder Made Of Absolutely Transparent Medical Polypropylene For Visual Inspection Of The Contents And The Absence Of Air Bubbles. The Presence Of A Retaining Ring On The Cylinder That Prevents Accidental Ejection Of The Piston. Clear, Abrasion-Resistant, Black With Graduation Increments Of No More Than 0.2 Ml. The Syringe Is Equipped With A Removable Medical Needle. Typical Size: No Less Than 22G (0.7 X 30/40 Mm). The Needle Should Have A Triangular Laser Sharpening And Silicone Coating To Minimize Pain. Latex-Free To Avoid Allergic Reactions, Pyrogen-Free, Non-Toxic. Sterile Product. Each Syringe Is Packed In An Individual Sealed Blister Package (Paper-Film)., Designed For Subcutaneous, Intramuscular And Intravenous Administration Of Drugs, As Well As For Suction Of Various Fluids From The Body. Single Use. 3-Component (Cylinder, Piston And Seal/Lip For Maximum Smoothness And Precise Dosing Without Jerking). At Least 10 Ml (Extended Graduation Up To 12 Ml Is Welcome For The Convenience Of Drug Collection). Coaxial (Located At The Center Of The Cylinder) Or Eccentric Tip Position. Cylinder Made Of Absolutely Transparent Medical Polypropylene For Visual Inspection Of The Contents And The Absence Of Air Bubbles. The Presence Of A Retaining Ring On The Cylinder That Prevents Accidental Ejection Of The Piston. Clear, Abrasion-Resistant, Black With Graduation Increments Of No More Than 0.5 Ml (Or No More Than 1.0 Ml). The Syringe Is Equipped With A Removable Medical Needle. Typical Size: No Less Than 21G (0.8 X 40 Mm) Or No Less Than 22G (0.7 X 30/40 Mm). The Needle Should Have A Triangular Laser Sharpening And Silicone Coating To Minimize Pain. Latex-Free To Avoid Allergic Reactions, Pyrogen-Free, Non-Toxic. Sterile Product. Each Syringe Is Packed In An Individual Sealed Blister Package (Paper-Film)., Designed For Subcutaneous, Intramuscular And Intravenous Administration Of Drugs, As Well As For Suction Of Various Fluids From The Body. Disposable Use. 3-Component (Cylinder, Piston And Seal/Cuff To Ensure Maximum Smoothness And Precise Dosing Without Jerking). At Least 20 Ml (Extended Graduation Up To 22 Ml Is Welcome For The Convenience Of Drug Collection). Eccentric (Displaced To The Edge Of The Cylinder) - For The Convenience Of Venipuncture At A Small Angle. Piston Cylinder Made Of Absolutely Transparent Medical Polypropylene For Visual Inspection Of The Contents And The Absence Of Air Bubbles. The Presence Of A Locking Ring On The Cylinder That Prevents Accidental Ejection Of The Piston. Clear, Abrasion-Resistant, Black In Color With A Graduation Increment Of No More Than 1.0 Ml. The Syringe Is Equipped With A Removable Medical Needle. Typical Size: No Less Than 21G (0.8 X 40 Mm). The Needle Must Have A Triangular Laser Sharpening And A Silicone Coating To Minimize Pain. Latex-Free To Avoid Allergic Reactions, Pyrogen-Free, Non-Toxic. Sterile Product. Each Syringe Is Packed In An Individual Sealed Blister Package (Paper-Film)., Medicine, Antiseptic Drug For External Use. Designed For Skin Disinfection (Treatment Of Injection And Surgical Fields, Hands Of Medical Personnel), Antiseptic Treatment Of Instruments, Preparation Of Compresses And Dosage Forms. Not Less Than 70%. Active Substance - Ethanol (Ethyl Alcohol), Excipient - Purified Water. Should Not Contain Denaturing Additives, Toxic Impurities And Third-Party Fragrances. Transparent, Colorless, Mobile Liquid With A Characteristic Alcoholic Odor. Should Be Easily Flammable. In Dense Polymer Canisters (Eurocanisters) With A Volume Of At Least 1 Liter., The Medical Plaster Consists Of A Polyethylene Base, An Absorbent Pad And A Protective Tape. Scope Of Application And Purpose: Use In Medical Institutions (Health Care Facilities) And At Home To Protect Minor Skin Lesions. For Single Use. Not Less Than 2.5 Mm X 5 M, Butterfly Needle (Device For Venipuncture / Butterfly Catheter), Designed For Short-Term Intravenous Infusion, Taking Blood Samples (Including In Patients With “Difficult” Veins, Children, In Geriatrics) And Administering Medications. Disposable Use. Made From High Quality Thin-Walled Medical Stainless Steel. The Presence Of A Triangular Atraumatic Sharpening And Silicone Coating For Painless Vein Puncture. Flexible, Elastic Wings Made Of Medical Plastic (Pvc), Ensuring Reliable Fixation Of The Device On The Patient’S Skin. Availability Of Color Coding Of The Size Of The Wings In Accordance With The International Iso Standard. Transparent, Flexible, Resistant To Kinks And Kinks. The Tube Material Must Not Contain Phthalates (Dehp-Free). Tube Length: At Least 250 Mm. The Presence Of A Universal Adapter Such As Luer-Lock (Luer-Lock) Or Luer (Luer) At The End Of The Tube For Connection To Syringes, Infusion Systems Or Holders Of Vacuum Tubes. The Presence Of A Protective Case/Cap On The Needle To Ensure The Safety Of Medical Personnel Until The Puncture.