Tenders Are Invited For Baku Renewal And Major Repair Of The Elevator Installed In The Underground And Surface Pedestrian Crossings Located At 14 Different Addresses, Purchase Of The Replacement Of The Escalator And Wheelchair Platform With A New One

Dismantling Of Floor Coverings In Buildings And Facilities With An Aggressive Environment: From Screeds Laid With Mortar, Making Covers From Granite Pans, The Number Of Pans Per 1 M2: Up To 4 Pieces, Installation Of An Escalator With A Lifting Height Of 15 M, Including: Preparatory Work (Dismantling Of The Escalator), Including: Preparatory Works, Building Exterior Escalator With Rise Height 4200 Mm, Angle Of Inclination 35°, Step Width 800 Mm, Designed To Work Fully Outdoors, In Harsh Climate Conditions, -40 / +72 Degrees And 95% Relative Humidity, In Accordance With En 115-1 And (Eu) (2023/1230) European Norms, Equipped With Ip Protection Class According To Iec 60529 Standards, Building Outdoor Escalator With Rise Height Of 5000 Mm, Inclination Angle Of 35°, Step Width Of 800 Mm, According To En 115-1 And (Eu) (2023/1230) European Norms, Fully Open-Air, Designed To Work In Harsh Climatic Conditions, -40 / +72 Degrees And 95% Relative Humidity Environment, Excavator-Loaded Construction Waste With A Bucket Capacity Of Up To 0.5 M3: Loading, Manual Loading Of Construction Waste: Loading (Loading Of Other Demolition Materials), Transportation Of Cargo With Dump Trucks Working Outside The Quarry With A Carrying Capacity Of 10 Tons (Code 400052), Transportation Distance - 15 Km, 1St Class Cargo, Construction Of Air-Permeable Facades, Facing With Panels From Composite Materials: Without Thermal Insulation Layer (Removal Of Facade Material Aluminum Composite Panel), Facing With Panels Of Composite Materials: Without Thermal Insulation Layer (Re-Injection Of Dismantled Aluminum Composite Panel), Dismantling The Frame Of Wooden Walls Consisting Of Shalbans, Wall Cladding (Re-Installation Of Removed Cladding Material Wooden Slats), Installation Of Window Light Covers Made Of Profiled And Rubber-Coated Polycarbonate And Acrylic Pans With Strip Edges (Removal Of Ceiling Material Polycarbonate), Installation Of Window Light Covers Made Of Profiled And Rubber-Coated Polycarbonate And Acrylic Pans With Strip Edges (Re-Injection Of Removed Polycarbonate)