Request For Quotation Purchasing Household Goods

Scales Up To 10 Kilograms, Scales Up To 100 Kilograms, Extension Cable 10 M, Bird Feeder According To Technical Specification, Case Width: 80 Mmcase Height: 60 Mmshackle Opening Dimensions (Height X Width): 40 X 40 Mmproduct Weight:0.2 Kg., Parameter Technical Data And Valuesproduct Name Flanged Tubular Electric Heater Block (Tenb-P-24.0-J-380)Rated Power 24.0 Kw (24000 W)Rated Voltage 380 V (Three Phases)Connection Diagram For “Star” (With Neutral Removed) Or “Triangle” Elementsdesign Bundle Of 6 U-Shaped Heating Elements (4.0 Kw Each) On One Baseworking Medium Water, Weak Solutions Of Acids And Alkalis (Heating Systems)Heating Tube Material Stainless Steel Aisi 304 (Marking: J Or P)Heating Element Tube Diameter 10 Mm / 13 Mm (Standard For High Heat Transfer)Insertion Length (L) 460 Mm (From The Inside Of The Flange To The Outermost Point Of The Tubes)Mounting Type (Flange) Flat, Press-On, Round (Without Thread)The Outer Diameter Of The Flange Is 85 Mm (Standard Dimensions Up To 90 Mm Are Allowed Under The Boiler Pressure Ring)Flange Plate Thickness 4.0 – 5.0 Mm (Reinforced, Industrial Pressure)Number Of Mounting Holes 6 Holes For M8 / M10 Boltsflange Material Galvanized Carbon Steel Or Stainless Steelmaximum Operating Pressure Up To 0.6 Mpa (6 Kgf/Cm² / 6 Bar)Maximum Heating Temperature Up To 100 °Ccold Insulation Resistance Of At Least 20 Mohmcontact Group Threaded Rods M4 / M5 With Nuts And Washers For Connecting Busbars, Led Lamp (595 × 595 Mm) Electrical And Lighting Parameters Nominal Power: 36 W Luminous Flux: 3800 – 4200 Lm Color Temperature: 5000 K Color Rendering Index: Ra ≥ 80 Pulsation Coefficient: < 1% (Corresponds To Sanitary Standards For Workplaces). Voltage Range: 176 – 264 V, Frequency 50 Hz Power Factor (Pf): ≥ 0.95 Design And Geometry Exact Dimensions: 595 × 595 × 40 Mm Housing Material: Sheet Metal (Steel) With White Powder Coating Installation: Universal - Built-In (In A Ceiling Cell) 3. Operational Data Protection Degree: Ip20 (Basic For Dry Offices) Service Life: At Least 50,000 Hours Energy Efficiency Class: A+ / A++., Electricity Metering Device Technical Specification Of The Meter (Indirect Connection, 10 Kv) Parameter: Technical Requirements Justification / Note Type Of Device: Three-Phase Multifunctional Microprocessor Meter: For Installation At Substations, Flows And Large Feeders Connection Diagram Indirect (3Ct + 3Tn Or 2Ct + 3Tn) Via High-Voltage Current And Voltage Transformers Rated Voltage (Unomcap U Sub Nom End-Sub ����Nom) 3×57.7/100 V Or 3×100 V Linear 100 V / Phase 57.7 V (Standard For Vt 10 Kv) Rated / Maximum Current 1 (2) A Or 5 (10) A Selected For The Secondary Winding Of Measuring Cts (Usually 5 A) Class Accuracy (Active / Reactive) 0.2S Or 0.5S / 1.0 (Or 0.5) According To The Pue For Commercial Metering Above 1 Kv, A Class Of At Least 0.5S Is Required Network Frequency 50 Hz Standard Operating Frequency Number Of Tariffs Multi-Tariff (At Least 4 Tariffs, Up To 12 Seasons) Allows Metering By Day Zones Metering Direction Bidirectional (Reception And Output) Mandatory For Substations (Metering Power Flows) Functional Features And Requirements Of Askue For 10 Kv Substations, Uninterrupted Data Dispatch Is Critical:, Membrane Tank 200 Liters Volume: 200 Liters.Membrane Type: Replaceable (Flange Type), Eliminating Contact Of The Coolant With The Walls Of The Housing. Membrane Material: Elastic Synthetic Rubber Epdm.Case Material: High Quality Carbon Steel. Maximum Operating Pressure: 10 Bar (1.0 Mpa). Preliminary Pressure (Factory Pumping) In The Gas Chamber: 1.5 – 2.0 Bar (Can Be Adjusted To The Design Pressure Of The System). Maximum Operating Temperature: +99 °C To +110 °C (Depending On Model And Manufacturer). Ambient Temperature Range: -10 °C To +50 °C. Connecting Thread (Pipe): From 1¼ To 1½ (Inches). Execution / Installation: Floor-Standing (On Legs). Case Color: Red Working Medium: Water And Aqueous Glycol Solutions With A Concentration Of Up To 50%., Automatic Switch 63A 3F, Automatic Switch 50A 3F, Automatic Switch 25A 3F, Automatic Switch 32A 3F, Circuit Breaker 32A, Circuit Breaker 25A, Circuit Breaker 16A, Time Relay, Circuit Breaker 10A, Membrane Tank 100 Liters Purpose: Compensation Of Thermal Expansion Of The Coolant In Closed Heating Systems.Total Volume: 100 Liters.Type Of Construction: Vertical (On Legs Or Supports) With A Replaceable Or Non-Removable Membrane.Housing Color: Red (Standard For Heating Systems). Manufacturing Materialscase Material: High-Quality Carbon Steel With A Protective Paint Coating.Membrane Material: Elastic Heat-Resistant Rubber Epdm (Ethylene-Propylene Rubber) Or Sbr, Dividing The Cavity Into Water And Air Chambers. Hydraulic And Temperature Parametersmaximum Operating Pressure: From 5 To 6 Bar (Depending On The Manufacturer; There Are Reinforced Versions Up To 10–16 Bar).Factory Pre-Inflation Pressure (Air): 1.5 Bar.Operating Temperature Range: -10 °C To +99 °C (Short-Term Up To +100...+110 °C). Connection And Dimensionsconnecting Size (Pipe Thread): Usually 1 Or 3/4 (Inch) External Thread.Execution: Floor (On Legs).Approximate Dimensions (H X W): Height Approximately 750-850 Mm, Diameter Approximately 450-480 Mm (Depending On The Specific Brand)., Deep Well Pump Electrical Parameters:Mains Voltage: Single-Phase, 220–230 V, Frequency 50 Hz.Power Consumption (Nominal): 1000 W. Length Of Network Cable Included: From 30 To 40 Meters Productivity: 5.2 M3/Hour. Maximum Head: 80 M Gost 31840-2012 (“Submersible Pumps And Pumping Units. Safety Requirements”)