Tenders Are Invited For Firefighting Equipment Installation Work – Fire Extinguishing Systems

Firefighting Equipment Installation Work – Fire Extinguishing Systems. The Tendered Work Includes The Fire Extinguishing Systems. The Hall 2 Building Will Receive A New Sprinkler System To Be Installed, As Well As A Dry Riser To Support The Fire Department In The Event Of A Fire. Sprinkling Throughout The Hall Is Planned. The Sprinkler System Is Kept Operational By A Pump System With Water Replenishment From The Local Water Company Network. The Pump Sucks The Extinguishing Water From A Storage Container In The Kg Head Building Room H2.Kg.Kg.03.01. The Steel Pipe Network Connected To The Water Supply Runs Through All Parts Of The Building That Need To Be Protected. A Secure Energy Supply To The System Is Planned For The Sprinkler System. This Means That The Energy Supply Must Be Guaranteed By The Public Network And Also By An Emergency Generator. All Components Of The Sprinkler System Must Be Approved For Use By The Vds. This Applies To Fittings, Pumps, Electrical Components, Pipe Fastenings, Sprinklers, Measuring And Display Devices, Pipes And Pipe Connections. To Facilitate Effective Extinguishing Work, The Stairwells F1, G1, Ab, Cd, Kb1 And Kb2 Are Planned As Provided For In The Fire Protection Concept 19B0014-G1. The Feed Points Must Be Provided At The Entrance To The Stairwells Or Escape Tunnels. The Sampling Points Are Arranged On The Main Platforms. Extinguishing Lines That Are Routed Outside The Stairwells And Are Not Protected By Sprinklers Must Be Covered In A Fire-Resistant Manner.