Request For Quotation Various Goods To Support The Economic Activities Of The Enterprise

Galvanized Steel Sheet. Designed For Construction, Installation And Repair Work. Made From Cold-Rolled Sheet Steel With A Protective Zinc Coating For Resistance To Corrosion And Weathering.Specifications:Material – Galvanized Sheet Steel;Width – 1000 Mm;Length – 1200 Mm;Sheet Thickness – 1.0 Mm;Surface – Flat, Smooth, Without Cracks, Delaminations, Burrs, Dents, Traces Of Corrosion And Other Mechanical Damage;The Zinc Coating Must Be Evenly Applied Over The Entire Surface Of The Sheet And Provide Reliable Protection Against Corrosion;The Sheet Should Be Easy To Machine (Cutting, Bending, Drilling) Without Compromising The Integrity Of The Protective Coating;Products Must Comply With The Requirements Of Gost 14918-2020 Or An Equivalent Regulatory Document;The Product Must Be New, Unused, Supplied In Original Packaging (If Available), With Manufacturers Markings, Date Of Manufacture And Confirmation Of Compliance With Established Requirements. (Application From The Caretaker), Refined And Correct Characteristics: Motor Oil For Diesel Engines Of Diesel Generator Sets. Intended For Use In Four-Stroke Diesel Engines Of Diesel Generator Sets. Mineral Motor Oil. Sae Viscosity Grade Is 30 (Or Equivalent As Required By The Engine Manufacturer). Api Operational Class – Not Lower Than Cc (Or Equivalent According To International Standards). Should Provide Lubrication Of Engine Parts During Operation Under High Load Conditions. It Has High Anti-Wear, Anti-Corrosion, Antioxidant And Detergent-Dispersant Properties. Provides Engine Protection Against The Formation Of Soot, Varnish Deposits And Sludge. Compatible With Diesel Engines Without Diesel Particulate Filter (Dpf). The Pour Point Is Not Higher Than Minus 18 °C. The Flash Point In An Open Crucible Is Not Lower Than +220 °C. Kinematic Viscosity At 100 °C Is In The Range Of 11.0–12.5 Mm²/S. Packaging: Canister With A Volume Of At Least 20 Liters. The Product Must Be New, Not Previously Used, In Original Sealed Packaging With The Manufacturers Marking, Indicating The Date Of Manufacture And Shelf Life., 8 Liter Fiberglass Spray Bottle For Herbicide Application, The Self-Tapping Screw With A Press Washer Is Sharp (For Wood And Thin-Sheet Materials), Galvanized. Technical Characteristics: Tip Type: Sharp, With A Special Thread For Reliable Fixation In Wooden Bases, Timber, Chipboard, Mdf, As Well As In Plastic Without Pre-Drilling. Head Shape: Semicircular With A Built-In Press Washer (Flange) To Increase The Clamping Area And Prevent Deformation Of The Materials Being Fastened. Spline Type: Phillips (Ph-2). Material: High-Strength Carbon Steel With Protective Anti-Corrosion Galvanized Coating. Dimensions: Diameter No Less Than 4.2 Mm, Screw Length - 32 Mm. Item Condition: New, Unused, Without Defects Or Signs Of Corrosion. Each Package Contains At Least 2000 Pieces., Self-Tapping Screw With Press Washer With Drill (Drill), Galvanized. Tip Type: With Drill (Drill) For Self-Drilling And Installation In A Metal Frame (Up To 2 Mm Thick) Without Pre-Drilling. Head Shape: Semicircular With A Built-In Press Washer (Flange) For Tight Pressing Of The Material. Slot Type: Cross-Shaped (Ph-2). Material: Hardened Carbon Steel With A Protective Anti-Corrosion Galvanized Coating. Dimensions: Diameter No Less Than 4.2 Mm, Screw Length - 16 Mm. Item Condition: New, Unused, No Defects. Each Package Contains At Least 2000 Pieces., The Self-Tapping Screw With A Press Washer Is Sharp (Press Washer Without A Drill). Screw Length 38Mm. Each Package Contains At Least 1000 Pieces., Plumbing Gloves, Coated (With Protective Coating)Purpose: Designed To Perform Plumbing, Plumbing, Repair And General Construction Work In Conditions Of High Humidity, Contact With Oily Substances, Dirt And Liquid Media. Provide Reliable Protection Of Hands From Mechanical Damage (Abrasion, Cuts, Punctures) And Chemically Non-Aggressive Liquids.Design And Base Material: The Base Of The Gloves Is Made Of Seamless Knitted Fabric (Cotton With Polyester Or Nylon), With A Knitting Density Of At Least 10–13 Gauze (Grade). The Presence Of An Elastic Cuff For Secure Fixation On The Wrist And Prevents Debris And Moisture From Entering The Glove.Coating Material (Pouring): Protective Layer Made Of High-Quality Material (Nitrile, Latex). The Coverage Is Complete (Sealed). The Coating Must Be Wear-Resistant, Elastic, Not Crack At Low Temperatures And Provide Reliable Grip On Slippery, Wet Or Oily Parts And Tools., Shopping Trolley In Accordance With Technical Specifications (For Laboratory), Current Clamps In Accordance With The Technical Specifications (Request From The Supply Manager), Cable Type Utp In Accordance With Technical Specifications. In The Bay. (Request From An Office Equipment Maintenance Engineer)., Self-Adhesive Decorative Film For Gluing Furniture Surfaces, Light Beige Color (To Be Agreed With The Customer), Roll Size 1000 X 450 Mm (For Dio), Self-Adhesive Decorative Film For Gluing Furniture Surfaces, Gray Color (To Be Agreed With The Customer), Roll Size 1000 X 450 Mm (For Dio)