Request For Quotation Manufacturing And Installation Of Blinds

Manufacturing And Installation Of Vertical Fabric Blinds In The Surgery Department.Blinds Must Be New, Not Previously Used, Made Of High-Quality Materials, Without Defects, Damage Or Visible Defects. The Design Of The Blinds Should Provide Regulation Of The Intensity Of Natural Light And The Ability To Completely Close The Window Opening.Blinds Must Consist Of Vertical Fabric Slats, An Upper Cornice (Profile) And A Control Mechanism. The Width Of The Lamellas Is At Least 89 Mm. The Fabric Must Be Dense, Wear-Resistant, Resistant To Fading And Suitable For Use In The Premises Of A Medical Institution. The Color And Texture Of The Fabric Are Determined By Agreement With The Customer Based On The Samples Provided By The Supplier Before Production Begins.Before Production Begins, The Supplier Is Obliged To Carry Out Control Measurements Of Windows Directly At The Customer’S Site. The Production Of Blinds Must Be Carried Out Strictly According To The Actual Dimensions Of The Windows, Taking Into Account The Characteristics Of The Window Openings And The Installation Location.The Design Should Provide For The Possibility Of Rotating The Vertical Slats And Moving Them To The Side To Regulate The Degree Of Illumination Of The Room. The Control Mechanism Must Ensure Smooth And Reliable Opening, Closing And Rotation Of The Slats.The Supplier Is Obliged To Provide All Materials And Components Necessary For The Complete Installation And Operation Of The Blinds, Including Vertical Fabric Slats, Top Cornice (Profile), Control Mechanism, Control Chain Or Cord Depending On The Design, Sliders, Holders, Brackets, Clamps And Fasteners. All Components Must Be Compatible With Each Other And Match The Design Of The Blinds. The Total Number Of Blinds Is For 15 Windows. The Width Of Each Window Is 2.5 Meters And The Height Of Each Window Is 150 Cm., Production And Installation Of Vertical Fabric Blinds In The Department Of Traumatology And Orthopedics.Blinds Must Be New, Not Previously Used, Made Of High-Quality Materials, Without Defects, Damage Or Visible Defects. The Design Of The Blinds Should Provide Regulation Of The Intensity Of Natural Light And The Ability To Completely Close The Window Opening.Blinds Must Consist Of Vertical Fabric Slats, An Upper Cornice (Profile) And A Control Mechanism. The Width Of The Lamellas Is At Least 89 Mm. The Fabric Must Be Dense, Wear-Resistant, Resistant To Fading And Suitable For Use In The Premises Of A Medical Institution. The Color And Texture Of The Fabric Are Determined By Agreement With The Customer Based On The Samples Provided By The Supplier Before Production Begins.Before Production Begins, The Supplier Is Obliged To Carry Out Control Measurements Of Windows Directly At The Customer’S Site. The Production Of Blinds Must Be Carried Out Strictly According To The Actual Dimensions Of The Windows, Taking Into Account The Characteristics Of The Window Openings And The Installation Location.The Design Should Provide For The Possibility Of Rotating The Vertical Slats And Moving Them To The Side To Regulate The Degree Of Illumination Of The Room. The Control Mechanism Must Ensure Smooth And Reliable Opening, Closing And Rotation Of The Slats.The Supplier Is Obliged To Provide All Materials And Components Necessary For The Complete Installation And Operation Of The Blinds, Including Vertical Fabric Slats, Top Cornice (Profile), Control Mechanism, Control Chain Or Cord Depending On The Design, Sliders, Holders, Brackets, Clamps And Fasteners. All Components Must Be Compatible With Each Other And Match The Design Of The Blinds. The Total Number Of Blinds Is For 16 Windows. The Width Of Each Window Is 2.5 Meters And The Height Of Each Window Is 150 Cm.