Tenders Are Invited For Delivery Of Reinforced Concrete Multi-Hole Slabs For The Implementation Of The Task Titled: Zagórze Śląskie Access Road To Agricultural Land

1. The Subject Of The Order Is The Supply Of Prefabricated Reinforced Concrete Multi-Hole Slabs With Dimensions Of 100×75×12.5 Cm. 2. Number Of Plates Ordered: 660 Pcs.3.The Boards Must Be Of Grade 14. Jomb Boards Should Have A Technical Approval And A Declaration Of Conformity (After January 1, 2017, The Boards Should Have The Following Documents: National Technical Assessment - Replacing The Technical Approval And The National Declaration Of Performance - Issued In Place Of The National Declaration Of Conformity). 5. The Surface Of The Boards Should Be Even Without Any Cracks, Cracks Or Gouges. Minor Recesses And Protrusions Up To 5 Mm Deep Or High Are Permitted. 6. The Concrete From Which The Slab Is Made Should Meet The Requirements For Minimum Strength Class C20/25 According To Pn-En 206-1:2003 And Pn-B-06265:2004.7.The Steel Used For The Reinforcement Should Meet The Requirements Of Pn-Iso 6935-1:1998, Pn-Iso 6935-1/Ak:1998, Pn-Iso 6935-2:1998, Pn-Iso 6935-2, The Reinforcement Of Jomb Road Slabs Should Be Made In Accordance With The Manufacturers Individual Technical Documentation, The Slabs Must Be Double-Reinforced With Steel Mesh According To The Standard Pn-82/H-93215 In The Lower And Upper Zones, Bar Thickness Min. 6Mm. The Cover Thickness Of The Main Reinforcing Bars Should Be 30 ± 5 Mm.8.The Water Absorption Should Be ≤ 6% And The Degree Of Frost Resistance ≥ F 150.9.The Required Period Of The So-Called Aging (Period From Production To Delivery) Min. 3 Weeks And Max. 12 Months. 10. The Edges Of The Boards Should Be Straight And Parallel. Small Chips And Nicks On The Edges, Up To 5 Mm Deep And Wide And Up To 20 Mm Long, Are Allowed, In The Number Of 2 Pieces Per 1 M Of The Board, With No More Than 3 Nicks On One Edge Of The Upper Surface, And No More Than 4 Nicks On The Lower Surface. The Warpage Of The Edges Of The Upper And Lower Surfaces Should Not Exceed 3 Mm Per 1 M Of Board Length. The Side Surfaces Of The Board Should Be Free From Cracks, Scratches, Dents And Protrusions. The Deviation From The Nominal Dimensions Should Be: Length ± 3 Mm, Width ± 3 Mm, Thickness ± 3 Mm. 11. In Addition To Sales, The Delivery Of Multi-Hole Plates Also Includes: Loading, Transport And Unloading In Places Indicated By The Ordering Party In The Walim Commune. Transport By Car With Own Unloading Required, E.G. Hds. 12. A Detailed Description Of The Subject Of The Order Includes (Appendix No. 3 To The Swz) Important Contractual Provisions (Appendix No. 3 To The Swz)