Tenders Are Invited For Special-Purpose Motor Vehicles – Delivery Of A Brand New Special-Purpose Vehicle For Television Inspection Of The Sewage Network With A Built-In High-Pressure Flushing Device, Built On A Two-Axle Chassis With An Insulated Truck Body For Przedsiębiorstwa Wodocągowo-Kanalizacyjne Legionowo Sp. Z O.O.

Special-Purpose Motor Vehicles – Delivery Of A Brand New Special-Purpose Vehicle For Television Inspection Of The Sewage Network With A Built-In High-Pressure Flushing Device, Built On A Two-Axle Chassis With An Insulated Truck Body For Przedsiębiorstwa Wodocągowo-Kanalizacyjne Legionowo Sp. Z O.O.. 1.1. The Subject Of The Order Is The Comprehensive Delivery Of A Brand New Special Vehicle Designed To Perform Comprehensive Television Inspection Of The Sewage Network, Equipped With A Built-In High-Pressure Flushing Device, Built On A Two-Axle Chassis With An Insulated Box Body. 1.2. The Vehicle Will Be Intended For Inspecting And Documenting The Technical Condition, As Well As Automatic Dimensioning And Profiling Of The Cross-Sectional Geometry Of Main Channels And Sewage Collectors With Diameters From Dn 150 Mm To Dn 1600 Mm, With A Circular Profile, And Inspection Wells With Diameters From Dn 400 Mm To Dn 1600 Mm. The Inspection System Intended For The Inspection Of Main Channels Must Be Equipped With A Multi-Point Laser Ring Integrated With The Camera Head, At Least 8 Points, Enabling Non-Contact, Real-Time (Online) Measurement Of The Actual Pipeline Diameter (Dn), Detection And Quantification Of Point Deformations And Precise Determination Of The Height Of Residual Sediments, Along With Automatic Transfer And Graphical Visualization Of This Data In The Inspection Software. 1.3. The Inspection System, Using Satellite Technology, I.E. An Additional Camera Introduced From The Main Sewer Level, Must Enable Inspection And Documentation Of Sewage Connections And Side Drains With Diameters From Dn 100 Mm To Dn 200 Mm, Connected To The Sewage Network, From The Level Of The Main Sewer With A Diameter From Dn 150 Mm To Dn 1600 Mm. 1.4. All Inspection Cameras Included In The System Must Be Able To Operate And Record Images In A Resolution Of Not Less Than Full Hd 1920×1080 Pixels. 1.5. The Vehicle Together With Its Bodywork, Equipment And All Devices Used Must Meet The Currently Applicable Technical Requirements And Regulations, Including Regulations Regarding The Admission Of Vehicles To Road Traffic, Occupational Health And Safety, Accident Prevention And Workstations Equipped With Screen Monitors.