Tenders Are Invited For Snow Removal And Anti-Slippage Services Using Our Own Equipment On Municipal And Internal Roads, Roadsides, Bridges In The Trzebownisko Commune In The Winter Season 2026/2027.

1. Snow Removal And Anti-Slippage Services Using Our Own Equipment On Municipal And Internal Roads, Roadsides, And Bridge Structures In The Trzebownisko Commune In The Winter Season 2026/2027.2.The Size Of The Order Will Depend On The Prevailing Weather Conditions. The Remuneration For The Service Will Be Remuneration For The Hours Actually Worked - Hours Of Equipment According To The Unit Prices Specified In The Contractors Offer.3.The Subject Of The Order Was Divided Into 2 Parts.4.The Scope Of The Order Includes: - Clearing Snow From Municipal And Internal Roads, Roadsides, Bridge Structures, Bus Bays, Municipal Squares. - Combating Slipperiness On Municipal And Internal Roads, Shoulders, Bridge Structures, - Road And Sidewalk Sweeping Service - Mechanical Cleaning With A Sweeper With A Width Of At Least 1.8 M, A Waste Container And Sprinkler - Readiness To Perform The Service Reported By Phone Within 60 Minutes, - Snow Removal To The Indicated Place By The Ordering Party In A Given Towns, - Preparing A Mixture Of Sand And Road Salt, - Collecting Sand And Road Salt On Your Own And At Your Own Expense. Number Of Units: 1) Clearing Snow From Roads, Municipal Squares, Bus Bays - Basic Order: 430 Hours Of Effective Work, Optional - 300 Hours Of Effective Work, 2) Combating Slipperiness: Basic Order - 260 Hours Of Effective Work, Option Law - 45 Hours Of Effective Work, 3) Snow Removal - Mechanical Piling, Loading And Removal Of Snow From Streets, Sidewalks, Squares - Basic Order: 180 M3, Option Right - 100 M3,4) Sweeping - Mechanical Cleaning - Basic Order - 70 Hours Of Effective Work, Option Right - 50 Hours Of Effective Work,5) Readiness For Winter Road Maintenance - For All Equipment Units, From December 21, 2026 To March 21, 2027 - Order Basic - 60 Days, Option Right - 10 Days.5.Road Salt And Sand: Road Salt Should Comply With The Polish Standard Pn-86/C-84081/02 Or Equivalent, It Should Be In A Non-Lumpy State, With Uniform Grain Size, Without Foreign Contaminants Such As Stones, Boards, Paper, Foil, Etc. The Road Salt That The Contractor Will Use To Perform The Order In Question Should Meet The Following Requirements: - Sodium Chloride Content Nacl - Min. 90% - Water Content - Max. 3.0% - Potassium Ferrocyanide Content - Min 3 Mg/Kg; Max 125 Mg/Kg - Content Of Substances Insoluble In Water - Max 8.0% The Optimal Grain Composition Should Be As Follows: - Number Of Grains >8 Mm - 0% - Number Of Grains >6.3 Mm - Max 5% ± 2% (3%-7%) - Number Of Grains In The Range Of 1-6.3 Mm - 35%-60% ±2% (33%-62%) - Number Of Grains <1 Mm - 30%-50% ±2% (28%-52%) - Number Of Grains <0.125 Mm - Max. 10% ±2% (8%-12%) Sand In Accordance With The Bn-87/6774-04 Standard Or Equivalent With A Fraction Content Of <0.075, Not More Than 0.5% By Weight, And The Content Of Grains Passing Through A 0.180 Mm Sieve, Not More Than 30% By Weight.