Quotation Are Invited For Clamp;Pg;10-95Mm/25-150Mm;Cu-Al;2 Bolt

Quotation are invited for Clamp;Pg;10-95mm/25-150mm;Cu-Al;2 Bolt Delivery Date: 2026/11/05 Delivery To: Logistics - Guguletu Store Material Store/PH: 444 4360 Delivery Address: 1 c/o Govan Mbeki & Link Road, Guguletu Closing Date: 2026/10/27 Closing Time: 12:00 PM Description: 50 each x clamp;pg;10-95mm/25-150mm;cu-al;2 bolt 210 each x clamp;pg;10-95mm/25-150mm;cu-al;2 bolt Specification: * CLAMP - TYPE: PG; CONDUCTOR RANGE: 10-95mm/25-150mm; MATERIAL: CU-AL; BOLTS: 2 bolt; SPECIFICATION: COPPER (MAIN) TO ALUMINIUM (TAP) M8 X 45 LONG - GRADE 316 STAINLESS STEEL BOLTS (HEX. HEAD) M8 BOLTS TORQUED TO 15NM, TO DIN EN 24017 (2 OFF) BOLTS SUPPLIED WITH M8 - GRADE 316 STAINLESS STEEL WASHERS LINE CONDUCTOR 10-95MM SQ. CU CABLETAP CONDUCTOR 25-150MM SQ. AL CABLETHE CONNECTORS SHALL BE SUITABLE FOR THE LINE AND TAP CONDUCTOR TYPES AND SIZES STIPULATED ABOVE THE CLAMP IS INTENDED FOR BI-METALLIC CONNECTIONS AND SUITABLE STEPS SHALL BE TAKEN TO ENSURE THAT THE CLAMP IS RESISTANT TO GALVANIC CORROSION THE CLAMP SHALL FEATURE A PERMANENTLY BONDED (WELDED) COPPER INSERT TO MAKE THE CONNECTION ONTO THE COPPER TAP CONDUCTOR. PLATED PG CLAMPS ARE NOT CONSIDERED TO BE SUITABLE FOR BI-METALLIC CONNECTIONS; STANDARDS: NRS 018-5, IEC 61284, DIN NE 24017, ANSI C119.4. * CLAMP - TYPE: PG; CONDUCTOR RANGE: 10-95mm/25-150mm; MATERIAL: CU-AL; BOLTS: 2 bolt; SPECIFICATION: COPPER (MAIN) TO ALUMINIUM (TAP) M8 X 45 LONG - GRADE 316 STAINLESS STEEL BOLTS (HEX. HEAD) M8 BOLTS TORQUED TO 15NM, TO DIN EN 24017 (2 OFF) BOLTS SUPPLIED WITH M8 - GRADE 316 STAINLESS STEEL WASHERS LINE CONDUCTOR 10-95MM SQ. CU CABLETAP CONDUCTOR 25-150MM SQ. AL CABLETHE CONNECTORS SHALL BE SUITABLE FOR THE LINE AND TAP CONDUCTOR TYPES AND SIZES STIPULATED ABOVE THE CLAMP IS INTENDED FOR BI-METALLIC CONNECTIONS AND SUITABLE STEPS SHALL BE TAKEN TO ENSURE THAT THE CLAMP IS RESISTANT TO GALVANIC CORROSION THE CLAMP SHALL FEATURE A PERMANENTLY BONDED (WELDED) COPPER INSERT TO MAKE THE CONNECTION ONTO THE COPPER TAP CONDUCTOR. PLATED PG CLAMPS ARE NOT CONSIDERED TO BE SUITABLE FOR BI-METALLIC CONNECTIONS; STANDARDS: NRS 018-5, IEC 61284, DIN NE 24017, ANSI C119.4. ***VARIOUS STORES - DELIVERIES*** CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the suppliers commercial position (including joint venture agreements), preferencing arrangements, or samples of materials, considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned may be declared non-responsive. NB: The Municipal Bidding Document 6.1 (MBD 6.1) is attached, in order to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with each and every RFQ submission, failure to submit will result in zero point allocation. Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent" Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/331581