Request For Quotation Purchase Of Chainsaws And Consumables

Guide Bar For Completing The Saw Set Of Chainsaws And Performing Heavy Work On Preparing Ice Blocks. Nominal Guide Bar Length: 20 Inches (50 Cm). Compatible Pitch Of Saw Chain And Chainsaw Drive Sprocket: .325. Bar Groove Width: 1.5 Mm (0.058). The Design Of The Bar Must Ensure The Standard Installation And Correct Tension Of The Saw Chain With A Strict Number Of Drive Links Equal To 76 Dl (Drive Links). Driven Sprocket Type: The Presence Of A Built-In End Sprocket In The Nose Of The Tire With A Corresponding Pitch Of .325. Nose Sprocket Bearing Type: Reinforced Closed-Type Bearing With Protection From The Aggressive Effects Of Water, Snow And Ice Chips. Shank Type (Seat): Universal Shank For Compatible Universal Class Chainsaws With An Engine Capacity Of 55.0-56.5 Cm³ (Fitting Standard K095 Or D009). Bar Body Material: High-Strength Alloy Silicon Or Cobalt-Chrome Steel, Resistant To Deformation, Bending And Abrasion At Extremely Low Temperatures. Anti-Corrosion Protection: Presence Of A Factory Protective Coating On The Entire Outer Surface To Prevent The Formation Of Rust When Working In A Humid Environment Of Open Water. Lubrication System: The Presence Of Technological Oil Channels And Holes At The Base Of The Shank For Effective Distribution Of Lubricant, Preventing Overheating Of The Groove. Tires, Chains And Nose Sprocket. Product Quality: The Product Must Be New, Not Used, Not Refurbished, Manufactured No Earlier Than 2025–2026. Compliance With Gost En Iso 11681-1-2013. Warranty Period: At Least 12 Months. Delivery In Original Factory Packaging Containing Clear Information About The Length Of The Tire 50 Cm (20), The Width Of The Groove. 1.5 Mm And Compatible Chain Pitch .325. Quality Certificate Provided., Guide Bar For Completing The Saw Set Of Chainsaws And Performing Heavy Work On Preparing Ice Blocks. Nominal Guide Bar Length: 20 Inches (50 Cm). Compatible Saw Chain Pitch: 3/8 (0.375). Bar Groove Width: 1.5 Mm (0.058) Driven Sprocket Type: Replaceable Or Fixed End Sprocket In Solid Metal Bar Design. Sprocket Bearing Type: Reinforced Sealed Bearing With Protection From Water, Snow And Ice Chips. Shank Type (Fit): Universal Shank For Compatible Professional Chainsaws With An Engine Capacity Of 55.0-56.5 Cm³ (Standard Fit Type K095 Or D009) Material: High-Strength Alloy Cobalt-Chromium Or Silicon Steel With Increased Resistance To Deformation, Wear And Bending When Working In Low Temperatures. Anti-Corrosion Protection: External Protective Coating On The Surface To Prevent Rust When Working In Wet Environments And In Open Water. Lubrication System: Special Oil Channels And Holes For Effective Distribution Of Lubricant And Prevent Overheating Of The Groove. Tires, Chain And End Sprocket. Product Quality: The Product Must Be New, Not Used, Not Refurbished, Manufactured No Earlier Than 2025–2026. Compliance With Gost En Iso 11681-1-2013 “Forestry Machines. Safety Requirements And Testing Of Chain Saws”. Warranty Period: At Least 12 Months From The Date Of Signing The Acceptance Certificate Of The Goods. Be Supplied In Strong Original Original Packaging, Ensuring Complete Safety Of The Products During Transportation And Storage. The Packaging Marking Must Contain Clear Information About The Length Of The Bar, The Width Of The Groove And The Pitch Of The Compatible Chain. The Goods Are Transferred In A Single Batch With The Provision Of A Quality Certificate Or A Document Of Conformity., Replacement Saw Chain For Professional-Grade Chainsaws When Performing Heavy-Duty Work For Preparing Ice Blocks. Compatible Guide Bar Length: 20Inch/50Cm. Saw Chain Pitch: .325 (Reduced Pitch For Reduced Vibration And Smooth Cutting). Drive Link Thickness (Slot Width): 1.5 Mm (0.058). Number Of Drive Links (Shanks): Strictly 76 Dl (Drive Links). Exceeding Or Underestimating The Number Of Links Is Not Allowed Due To The Impossibility Of Correct Tension On A Standard 50 Cm Bar With A Sprocket Pitch Of .325. Cutting Tooth Type/Profile: Chisel (Super-Tooth) Or Semi-Chisel With A Rectangular Or Rounded Profile For Aggressive Sawing. Manufacturing Material: High-Alloy Chromium-Nickel Steel With Increased Resistance To Stretching And Temperature Deformations, The Presence Of A Wear-Resistant Coating Of Cutting Links With Carbide (Pobedite) Tungsten Carbide Tips To Increase The Grinding Interval. Lubrication System: The Presence Of Technological Holes Or Channels In The Leading Links For Uniform Distribution And Retention Of Oil Along The Entire Length Of The Tire Groove. Product Quality: The Product Must Be New, Not Used, Not Restored, Not Produced Earlier. 2025–2026 Compliance With Gost En Iso 11681-1-2013 “Forestry Machines. Safety Requirements And Testing Of Chain Saws For Cutting Wood. Part 1. Chain Saws For Logging Work.” Warranty Period: At Least 12 Months From The Date Of Signing The Acceptance Certificate Of The Goods. The Delivered Goods Must Be Delivered In Durable Original Packaging, Ensuring Complete Safety. Products During Transportation And Storage. The Packaging Marking Must Contain Clear Information About The Chain Pitch .325, Link Thickness 1.5 Mm And The Number Of Shanks 76 Pieces. The Transfer Of Goods Is Carried Out In A Single Batch With The Provision Of A Quality Certificate., Replacement Saw Chain For Professional-Grade Chainsaws When Performing Heavy-Duty Work For Preparing Ice Blocks. Compatible Guide Bar Length: 20Inch/50Cm. Saw Chain Pitch: 3/8 (0.375 - Coarse Pitch). Drive Link Thickness (Groove Width): 1.5 Mm (0.058). Number Of Drive Links (Shanks): Strictly 72 Dl (Drive Links). Exceeding Or Underestimating The Number Of Links Is Not Allowed Due To The Impossibility Of Correct Tension On A Standard 50 Cm Tire. Type/Profile Of Cutting Tooth: Chisel (Super-Tooth) Or Half-Chisel (Semi-Chisel) With A Rectangular Or Rounded Profile For Aggressive Sawing. Manufacturing Material: High-Alloy Chromium-Nickel Steel With Increased Resistance To Tension And Temperature Deformation, The Presence Of A Wear-Resistant Coating Of Cutting Links With Carbide (Pobedite) Tungsten Carbide Tips To Increase The Grinding Interval. Lubrication System: The Presence Of Technological Holes Or Channels In The Leading Links For Uniform Distribution. And Retention Of Oil Along The Entire Length Of The Tire Groove. Quality Of The Product: The Product Must Be New, Not Used, Not Refurbished, Manufactured No Earlier Than 2025–2026. Compliance With Gost En Iso 11681-1-2013 “Safety Requirements And Testing Of Chain Saws For Cutting Wood. Part 1. Chain Saws For Logging Work: Not Less.” 12 Months From The Date Of Signing The Goods Acceptance Certificate., Universal Class Chainsaw, Powerful Semi-Professional In Factory Configuration, For Preparing Ice Blocks. Technical Characteristics: Tool Class: Professional Universal, Increased Reliability. Engine Type: Gasoline, Two-Stroke, Air-Cooled. Engine Power: At Least 3.4 Hp. (2.5 Kw) And No More Than 3.8 Hp. (2.8 Kw). Engine Displacement: Not Less Than 55.0 Cm³ And Not More Than 56.5 Cm³. Guide Bar Length: Minimum 20 Inches (50 Cm). Saw Set Parameters: Chain Pitch 3/8. Bar Groove Width / Drive Link Thickness: Not Less Than 1.5 Mm. Fuel Tank Capacity: Not Less Than 0.44 L. Oil Tank Capacity: Not Less Than 0.32 L. Tool Weight (Without Cutting Set And Fuel): Not More Than 6.1 Kg. Requirements: Starting System: Availability Of A Decompression Valve Or A Lightweight Manual Start. Filtration System: Availability Of Preliminary Centrifugal Air Purification. Anti-Vibration System: Availability Of Insulated Handles (On Steel Springs Or Dampers). Safety: Availability Of Automatic And Manual Chain Brake. Delivery Set: 1 Pc. Saw Guide Bar 20 (50 Cm) Long. Saw Chain For 20 Bar (3/8 Pitch, 1.5 Mm Groove) - At Least 2 Pcs. Protective Cover For Tire - 1 Pc. Combination Wrench For Maintenance (Chain Tension/Spark Plug) - 1 Pc. Operating Manual In The State (Kazakh) And Russian Languages. Product Quality: The Product Must Be New, Not Used, Not Refurbished, Produced No Earlier Than 2025–2026. Compliance With Gost En Iso 11681-1-2013 “Forestry Machines. Safety Requirements And Tests For Logging Chain Saws. Part 1. Chainsaws For Logging Work.” Warranty Period: At Least 12 Months From The Date Of Signing The Goods Acceptance Certificate.