Request For Quotation Purchasing Accessories For The Heating Season (Please Read The Technical Specifications Carefully)

Immersion Protective Sleeve (Thermowell) For Boiler Temperature Sensor. Body Material: Copper (Longest Blind Tube). Threaded Head Material: Brass. (Copper Tube Is Securely Soldered Into A Brass Plug With External Thread) The Head Has A Hexagonal Shape For A 22Mm Wrench. Product Length 11 Cm. Cut Aa. Thread 1/2 Inch (Cylindrical Pipe). Copper Tube With A Diameter Of 16 Mm, Wall Thickness 0.5 Mm. Pressure Seal/Tight Plug., Wire For Ignition Of The Burner, High-Voltage, Copper, Stranded, 1 Meter. Temperature 200-300°C. On One Side There Is A Cap For The Spark Plug/Electrode, On The Other There Is A Cap For The Bolt. Insulation: Silicone Rubber, Haplog-Free, Heat-Resistant. Core: Copper, Sometimes With Anti-Interference Braiding., High-Voltage Fuse Pkt-101-10-8-40-U1, Rated Voltage 10 Kv, Rated Current 8 A, Rated Shutdown Current 40 Ka., High-Voltage Fuse Pkt-101-10-16-63-U1, Rated Voltage 10 Kv, Rated Current 16 A, Rated Shutdown Current 63 Ka., High-Voltage Fuse Pkt-101-10-20-100-U1, Rated Voltage 10 Kv, Rated Current 20 A, Rated Shutdown Current 100 Ka., Inverter Boost Pump, Network Voltage: 220W; Connector Diameter: 25Mm; Throughput: Q (M3/H): 6; Allowable Water Temperature: Up To 80 °C; Maximum Pressure H(M): 53; Power Consumption: 1100Bt (High Power - Lifting Height Up To 8.5 Meters In 2 Minutes. The Engine Automatically Adjusts The Required Power. Allows You To Maintain The Desired Range Of Water Pressure, Regardless Of The Number Of Simultaneously Open Water Intake Points. Wide Voltage Range - From 180 Up To 260V. Ultra-Low Noise Level. Easy To Operate: Set The Required Pressure, And The Pump Will Automatically Adjust Its Operation, Maintaining The Specified Pressure Range. All Faults Are Displayed On The Screen., Ignition Electrode (Ignition Electrode), For Gas, Liquid Fuel Or Combined Burners Of Heating Boilers. The Part Is Part Of The Automatic Boiler Start System. Its Main Task Is To Create A Powerful Electric Spark. A High-Voltage Transformer Supplies Current To The Electrode Through A Special Cable. The Current Passes Through An Internal Metal Rod. A Strong Spark Discharge Is Formed At The Curved Open End (Tip), Which Instantly Ignites The Air-Fuel Mixture In The Combustion Chamber Of The Burner. Part Characteristicsceramic Body (White Part): Serves As A High-Strength Insulator. Ceramics Have Increased Heat Resistance And Dielectric Strength, Preventing Sparks From Reaching The Burner Body In The Wrong Place. Metal Rod: Made Of Specialized Heat-Resistant Alloys (Often Kanthal), Resistant To Constant Exposure To Open Flames And Oxidation. Contact Group (Lower Metal Fitting): Designed For Quick And Reliable Connection Of The High Voltage Ignition Cable. The Working Tip, Bent At An Angle Of 90 Degrees, Is Designed Specifically For Strict Positioning Of The Spark Gap Relative To The Nozzle Or Divider Burners. The Outer Part Of The Ceramic Often Has A Diameter Of 8 To 11 Mm., Check Valve, Brass, With Spring, With Filter With Internal Thread, Nrv Ef Nrv Ef Is A Threaded Check Valve. The Coolant Used With The Valve Is Water Or Water-Glycol Mixtures Up To 50% With Temperatures Up To 110 °C. With Diameters 25 Mm And Nominal Pressure Pn 25 Bar