Tenders Are Invited For Joinery Work – Carpentry Work Windows, External Doors

Joinery Work – Carpentry Work Windows, External Doors. Renovation Of The Otfried Müller House -Young Theater- Hospitalstraße 6 / 37073 Göttingen ##Installation/Assembly Of Windows And External Doors In The Newly Built Extension ##The Construction Project Envisages The Renovation Of The Otfried Müller House, Which Is Partly Listed, And The Hall Building, Which Is Also Partly Listed. The Newer, Unprotected Extension Will Be Demolished And Replaced With A New Extension. #Extension: The New Extension Will Be Rebuilt As A Solid Construction, Mainly With Hollow Prestressed Concrete Floorboards As A Ceiling Construction And With A Standard Wooden Roof Truss. This Extension Will Consist Of A Basement And 2 Upper Floors, Accessed By A Staircase That Extends From The Basement To The 2Nd Floor. The Floor Heights In The Rooms Of The Building Are Different. The Heights Of The Building Can Be Found In The Surveyors Plans From The 3D Laser Measurements In The System. ##The Building Is Located In The Center Of The City Of Göttingen, Hospitalstrasse 6, 37073 Göttingen. In Front Of The Building To The East And North There Is A Large L-Shaped Asphalted Square “Am Wochenmarkt”. ##Traffic Conditions On The Construction Site, In Particular Traffic Restrictions: #Stopping On The Construction Site Is Only Permitted For Unloading And Loading. There Are No Parking Spaces On The Construction Site. It Is Up To Every Business Owner To Take Care Of Their Parking Spaces. The “Am Wochenmarkt” Square Is Also Not Allowed To Be Used As A Parking Lot; There Is A Fire Department Entrance Through The “Am Wochenmarkt” Square, Which Must Always Be Kept Open. #The Weekly Market Was Built In A Load Class Bk 1.0. This Corresponds To A Maximum Axle Load Of 10 Tons With A Maximum Permissible Total Weight Of 40 Tons. These Limits Must Be Adhered To In Any Case. ##Important Note: #The Usability Of Transport Facilities And Transport Routes In The Interior Of The Property To Be Renovated Is Restricted; In This Regard, Reference Is Made To The Type, Location, Dimensions And The Preliminary Remarks In The Specifications. #During The Execution Period, Cross-Trade Work In The Building Is To Be Expected ##Essential Execution Work Is: #- Aluminum Window Element 2890 X 2950 Mm 1 Piece #- Aluminum Window Element 2100 X 2100 Mm 1 Piece #- Aluminum Window Sill ~ 20 M #- External Door Rr, 1-Leaf. Skylight, 1600 X 3500 Mm 1 Piece # - Outer Door Rr, 1-Leaf. Skylight, Side Panel, 2400 X 3725 Mm 1 Piece #- External Door Rr, 2-Wing Skylight, 1800 X 3325 Mm 2 Pieces #- Revolving Door Drive #- Window System Awning, W/H = 2890 / 2950 Mm 2 Pieces #-Work And Assembly Planning ##Work And Monthly Planning Optional: Maintenance Of The Self-Built Technical Systems (If Necessary, Will Be Commissioned At The Latest Upon Acceptance Of The Service Through A Separate Amev Maintenance Contract) ###Contractual Individual Deadlines: #After The Order Is Placed - February 14Th, 2027: Preparation Of Work And Assembly Planning # February 15Th, 2027 - May 28Th, 2027: Execution Work On The Construction Site