Request For Quotation Purchase Of Spare Parts For Repair Of Special Equipment

Original Boot (Dust Ring Of The Brake Caliper Piston) Of The Working Brake System Of The Heavy Motor Grader Shantui Sg21-3. Catalog Number (Oem Article): 224-45-04014. Set For 1 Brake Caliper: 4 Pieces Of Boots. Material: High-Strength, Elastic, Oil- And Petrol-Resistant Rubber (Epdm/Nbr Polymer Composition With Increased Wear Resistance). The Material Must Be Completely Resistant To The Aggressive Effects Of Brake Fluid, Mineral Oils, Road Dirt, Moisture And Reagents. Resistance To Temperature Conditions: Effectively Maintaining Elasticity And Sealing Properties In The Extreme Temperature Range Of Operation Of Special Equipment From -45°C To +150°C Without Cracking Or Hardening. Overall Dimensions (Approximate): 85X85x5 Mm. Unit Weight: About 0.02 Kg. The Product Must Be Strictly Original, From The Manufacturer Of Shantui Special Equipment. Delivery Of Analogues Is Not Allowed. The Product Must Be New, Not Used, Not Refurbished, Manufactured No Earlier Than 2025/2026. The Boot Must Ensure 100% Tightness Of The Assembly, Protecting The Caliper Brake Piston Mirror From Abrasive Dust And Dirt. Compliance With Gost Iso 6112 (Or Applicable International Oem Quality Standards Iso 9001). The Warranty Period For The Product Is At Least 12 Months From The Date Of Delivery And Signing Of The Acceptance Certificate., Set Of Original Brake Pads (Friction Linings) For Motor Grader Shantui Sg21-3. Catalog Number (Oem Article): 224-45-14007. Base (Frame) Material: High-Strength Structural Steel Of Increased Rigidity, Resistant To Deformation Under Peak Temperature Loads. Friction Lining Material: Non-Asbestos Semi-Metallic (Semi-Metallic) Or Metal-Ceramic Friction Composition With High Thermal Conductivity And An Increased Coefficient Of Friction Stability. Resistance To Temperature Conditions: Effective Operation Of The Brake Unit When The Friction Element Is Heated To +400°C Without Loss Of Braking Properties (Fading Effect). Unit Weight (Approximate): About 1.5 Kg. Quantity And Completeness: The Product Is Supplied In Quantities Of 12 (Twelve) Pieces, Constituting 1 (One) Complete Set For Replacing Brake Pads On All Motor Grader Impellers. Product Condition: The Product Must Be New, Not Used (In Operation), Not Refurbished, Produced No Earlier Than 2025/2026. Compliance With Gost Iso 6112-2022 (Or Gost 34812-2022) “Road Vehicles. Brake Linings. Analysis Of Friction Materials. The Warranty Period For The Product Is At Least 12 Months From The Date Of Delivery.