Tenders Are Invited For Procurement Of Various Sizes Of D.I. Stc And Cast Iron Saddle Clamp - Water Service Connection Materials/Fittings

- Middle Ring Shall Not Be Less Than 6.35Mm Thickness And Should Be 178Mm Long - Bolts, Nuts And Washers Shall Be Stainless - Bolts And Nuts Should Be 5/8 X 11 In Diameter And Length - Bolts Threaded On Both Ends: 3 1/4 Thread Length - Washer Size, - Middle Ring Shall Not Be Less Than 6.35Mm Thickness And Should Be 178Mm Long - Bolts, Nuts And Washers Shall Be Hot-Dipped Galvanized - Bolts And Nuts Should Be 5/8 X 11 In Diameter And Length - Bolts Threaded On Both Ends: 3 1/4 Thread Length -, - Middle Ring Shall Not Be Less Than 6.35Mm Thickness And Should Be 178Mm Long - Bolts, Nuts And Washers Shall Be Hot-Dipped Galvanized - Bolts And Nuts Should Be 5/8 X 11 In Diameter And Length - Bolts Threaded On Both Ends: 3 1/4 Thread Length -, - Middle Ring Shall Not Be Less Than 6.35Mm Thickness And Should Be 178Mm Long - Bolts, Nuts And Washers Shall Be Hot-Dipped Galvanized - Bolts And Nuts Should Be 5/8 X 11 In Diameter And Length - Bolts Threaded On Both Ends: 3 1/4 Thread Length -, 5/8 X 4 Full Thread Bolts, Nuts And Washer (Hot-Dipped) With Gasket, -5/8 X 4 Full Thread Bolts, Nuts And Washer (Hot-Dipped) With Gasket, -5/8 X 4 Full Thread Bolts, Nuts And Washer (Hot-Dipped) With Gasket Note: 1. The Bidder Shall Submit The Following, Together With Their Quotation: * Certified Shop Drawings; And/Or * One (1) Sample Of Each Offered Pro