Request For Quotation Means For Medium And Military Repairs (Laboratories)

Milling Machine, Machine Type Universal Vertical-Horizontal Turret Milling Machine Work Table Size ~1270 × 254 Mm Number Of At Least T-Slots 3 Pcs., Width ~16 Mm, Pitch ~65 Mm Axial Movements (X/Y/Z) Approximately 780–850 Mm / 380–410 Mm / 380–400 Mm Stroke Spindle (Quill) About 127 Mm Spindle Taper R8 Or Iso/Nt30 Or Iso/Nt40 (Depending On Version) Spindle Speed Range In Steps From Approximately 60–70 To 4500–4600 Rpm Spindle Motor Power About 2.2–3.0 Kw Head Rotation/Tilt Rotation ±90°, Tilt ±45° Machine Weight From 1200–1500 Kg Machine Dimensions Approximately No Less Than 1700×1800×2300 Mm, Servo Tester, Digital Servo Tester X 1 For Testing Servos And Regulators (Esc), Supply Voltage 4.8-6V. Possibility Of Changing The Frequency Of The Output Signal (Pulse Width Button) 50Hz, 125Hz, 250Hz. There Are 3 Operating Modes (Select Button): Manual - Turn To A Set Angle, Neutral - Set To The Middle Position. Automatic - Turn To The Right / Left At A Given Speed. Input Voltage: Not Less Than 7 V At A Maximum Current Of 10 A; Main Output Port: No Less Than 5V At A Maximum Current Of 10A; Signal Port Output Voltage: No Less Than 5 V At Maximum Current 4 A, Workbench Table For Milling Machine And Lathe, Length No Less Than 1200–2000 Mm Depth No Less Than 700–1000 Mm Working Surface Height No Less Than 850–950 Mm Tabletop Thickness No Less Than 40–70 Mm (Metal/Wood) Permissible Load No Less Than 1000 Kg And Above., Glue Gun, Hot Glue Gun. Power: No Less Than 30 W, Rod Diameter: No Less Than 10 Mm, Used For Gluing Wood, Plastic, Fabric, Cardboard, Ceramics And Decor, As Well As For Minor Repairs And Handicrafts. Works Without An Outlet, Convenient For Field Work. Design: Observation Window, Stand Leg. Rod Length: No Less Than 150 Mm., Drilling Machine , A Corded Desktop Drilling Machine Is Designed For Precise Processing Of Workpieces. The Power Is At Least 450 W, Power Is Supplied From Ac 220–230 V. The Drilling Diameter Is At Least 12 Mm, The Weight Is At Least 25 Kg, Which Ensures Stability And Good Controllability. The Device Is Equipped With Adjustable Speeds, The Table Has The Ability To Tilt And Move, As Well As A Protective Cover. Number Of Revolutions Not Less Than 2500 Rpmnumber Of Speeds At Least 6Max. Drill Diameter At Least 12 Mmdesktop Installationmotor Type: Electric Motor, Power Not Less Than 500 Wdimensions: Height No Less Than 75 Cm. Desk Dimensions No Less Than 150/150 Mm., Multimeter, Multimeter-1Pc Is Designed To Measure The Contiguity Between Connections Ac Voltage 200.0 Mv - 600 V Ac Voltage (Error) 1.2% Dc Voltage 200.0 Mv - 600 V Dc Voltage (Error) 0.5% Dc Current 200.0 Μa - 10 A Dc Current (Accuracy) 1.0% Resistance (Max. Resolution) 20000.0 Ohm Resistance (Accuracy) 0.8% Detection Of Damage To Wiring, Connections. Measurement: Dc Voltage, Ac Voltage, Performance Of Diodes And Transistors, Temperature. There Is A Display Backlight. The Device Is Digital., Set Of Cordless Power Tools, Type Of Tool: Cordless Number Of Tools: No Less Than 12 Tools In The Set: Wrench, Circular Saw, Drill/Screwdriver, Hammer Drill, Angle Grinder, Sander, Chain Saw Composition (In Detail), Number Of Batteries: No Less Than 6, Charger: No Less Than 2 Battery Type: Li-Ionbattery Capacity 4.0 Ah Number Of Batteries At Least 12 Case Included Yes Weight 7.0 Kg The Set Must Include: 1. The Impact Wrench Is A Powerful Tool For Car Service, Equipment Repair, Structural Assembly And Installation. Provides High Torque And Stable Performance. 2. Circular Saw - Designed For Cutting Wood, Plywood, Osb, Plastics And Other Materials. It Is Characterized By High Accuracy And Stability During Operation. 3. Drill-Driver - A Universal Tool For Drilling And Tightening Fasteners. It Has Several Speeds, Reverse And Comfortable Ergonomics. 4. Hammer - Indispensable For Concrete, Brick, Stone. Suitable For Drilling, Chiseling And Creating Holes For Anchors.5. Angle Grinder (Grinder) - Used For Cutting Metal, Grinding, Cleaning And Working On Stone. It Has Stable Speed And A Protective Casing.6. Grinder - Allows You To Perform Finishing Processing Of Wood, Metal And Other Surfaces. Provides Smooth And Accurate Grinding Without Vibrations. 7. Chainsaw - Suitable For Cutting Wood, Trimming Branches And Household Work. Lightweight, Compact And Safe To Use. 8. Cordless Blower - Flow Not Less Than 5 M3/Min, Power Not Less Than 1000 W, Pressure Not Less Than 8000 Pa, Speed Not Less Than 0-20,000 Rpm. Clears The Area Of ​​Dust And Sawdust. 9. Cordless Milling Cutter - Milling Depth Of At Least 0-30 Mm. For Carpentry Work. 10. Spray Gun - Nozzles No Less Than 0.5/1.0/1.5/.2.0 Mm, Container Volume No Less Than 600 Ml. For Smooth Application Of Paint, Varnish And Primer. 11. Cordless Pruning Shears - Cutting Range Of At Least 0-20 Mm. 12.Auto-Compressor - For Inflating Tires., Diesel Power Plant 10 Kw, 4.1 General Parameters• Type: Diesel Power Plant • Rated Power: At Least 10 Kw (10–12.5 Kva) • Power Factor: Cosϕ 0.8–1.0 • Frequency: 50 Hz 4.2 Electrical Characteristics• Output Voltage: O 230 V (Single-Phase) And/Or O 230/400 V (Three-Phase) • Voltage Stabilization: Automatic Voltage Regulator (Avr) • Generator Type: Brushless (Brushless/Pmg) 4.3 Engine• Type: Diesel, 4-Stroke • Cooling: Air Or Liquid • Start Type: Electric Starter 4.4 Fuel System• Fuel Tank Volume: Up To 200 L • Fuel Consumption: 3.2–4.2 L/H (At Full Load) 4.5 Management And Control System• Control Panel With Instruments: O Voltmeter O Ammeter O Operation Indicators • Availability Of Sockets And Circuit Breakers • Connectivity: O Automatic Transfer Systems (Ats) O Remote Start 4.6 Security System• Automatic Stop When: O Low Oil Pressure O Engine Overheating • Overload Protection 4.7 Design• Execution: O Open (On Frame) And/Or O In A Noise-Insulating Casing And/Or O Container Type • Noise Level: 50–80 Db(A) At 7 M • Weight: From 170 To 456 Kg • Dimensions: From 720×550×620 Mm To 1500×700×1300 Mm, Table For 3D Printer - 1 Piece