Tenders Are Invited For Delivery Of A Specialized Instrument And Control Of The Main Equipment Of The 1St Circuit Of The 5Th And 6Th Block Using The Kinetic Indentation Method

The Subject Of This Public Procurement Is To Supply A Modern Automated System (Hereinafter For Short Device) For Measuring The Mechanical Characteristics Of Metals According To The Indentation Diagram (Kinetic Indentation Method) Of Equipment. The Activities Should Be Carried Out Using The Kinetic Indentation Method In Accordance With Bds En Iso 14577-1:2015 Or Equivalent/S.Stages And Volumes Of Works:Stage 1 - Delivery Of The Device, In Accordance With Bds En Iso 14577-1:2015 Or Equivalent, Including One Set Of Spare Tools And Accessories (Sip);Stage 2 - Carrying Out Measurements Of The First (5 Or 6) Eb Of The Base Metal And The Metal Of The Welded Joints Without Sampling - Brinell Hardness Measurement And Determination Of Mechanical Properties By The Kinetic Indentation Method, Of The Following Block Equipment:• Third Main Circulation Pipeline;• Kn And Connecting Pipeline Of Kn;• Second Pg;• Upper Block, Reactor Housing, Support Ring Of The Reactor Plant.Stage 3 - On The Basis Of The Results Obtained From The Measurement Of The Ksk Of The First (5 Or 6) Eb, Preparation Of A Technical Report.Stage 4 - Provision Of Technical Assistance To The Trained Personnel Of The Kozloduy Npp In The Measurement Of The Mechanical Characteristics Of Metals According To The Indentation Diagram Of The Following Equipment From The Second (5 Or 6) Eb:• First Main Circulation Pipeline;• Kn And Connecting Pipeline Of Kn;• First Pg;• Upper Block, Reactor Housing, Support Ring Of The Reactor Plant.Stage 5 - Provision Of Technical Assistance To Trained Personnel Of The Kozloduy Npp, In The Preparation Of The Technical Report For The Second Eb.Measurements, According To Stage 2 And Stage 4, To Be Made During The Pgr Period Of 5 And 6 Eb.The Technical Reports Resulting From The Implementation Of Stage 3 And Stage 5 Are Separate Documents For 5 And 6 Eb.​​​​​​​During The Control Of The Equipment And During The Preparation And Preparation Of The Technical Report From The Measurements Of The First Eb, The Contractor Shall Train A Minimum Of 5 (Five) Persons From The Staff Of The Employer At His Expense.The Training Should Be Conducted In Bulgarian.​​​​​​​