Tenders Are Invited For Modernization Of The Recreation Area At Lake Bublik

The Subject Of The Order Is The Implementation Of The Task Entitled: Modernization Of The Recreation Site At Lake Bublik As Part Of The Project Modernization Of The Recreation Site At Lake Bublik With The Purchase Of A Mobile Stage And Benches Implemented As Part Of Financial Assistance Under Intervention I.13.1 Leader / Community-Led Local Development - Implementation Of Lds - Excluding Grant Projects Covered By The Strategic Plan For The Common Agricultural Policy For The Years 2023–2027. The Project Will Be Implemented In The Pomeranian Voivodeship, Chojnice Poviat, In The Konarzyny Commune, In Konarzyny On Lake Bublik, Plot No. 432/1 And 430/7, Konarzyny Geodetic District. The Order Was Divided Into 2 Parts. Part No. 1 – Modernization Of An Existing Wooden Shelter. The Task Involves The Modernization Of An Existing Wooden Shelter At Lake Bublik In Konarzyny, On Plot No. 432/1, Konarzyny District, Commune. Konarzyny. The Modernization Aims To Improve The Technical Condition, Durability, Safety And Functionality Of The Facility While Maintaining Its Wooden Character. The Scope Of Work In Particular Includes: 1. Dismantling The Existing Roofing Felt Made Of Felt; 2.Making A New Covering With Two Layers Of Modified Heat-Sealable Felt;3.Replacement Of Gutters And Drainage Elements Made Of Coated Steel Sheet;4.Cleaning And Three-Time Impregnation Of The Entire Wooden Structure With Drewnochron Type Preparation Or Equivalent;5.Cutting Off All Wooden Elements From The Ground And Lifting The Entire Structure Of The Shelter In Stages;6.Construction Of New Supports/Connectors Of The Structure While Maintaining Permanent Separation Of Wood From The Ground;7.Obtaining A Clear Height Of At Least 2.00 M In The Transition Zone;8.Demolition Of The Existing Concrete Blocks And Edges And Construction Of A New Surface;9.Construction Of A New Fireplace Under A Roof Made Of Non-Flammable And Heat-Resistant Materials;10.Modernization Of Existing Seats;11.Equipping Existing Seats With Wooden Backrests: - The Existing Street Furniture (Benches) Does Not Have Factory Anchoring Points, Structural Nodes Or Reserves Of Load-Bearing Capacity Intended For The Installation Of Retaining Elements. As Part Of The Implementation Of This Task, It Is Necessary To Carry Out The Following Engineering Operations: - In Situ Inventory And Alignment: Individual Fitting And Alignment Of Assembly Points On The Structural Elements Of Existing Benches That Show Dimensional Deviations; - Construction Of A Dedicated Supporting Substructure: Design And Prefabrication (Or Assembly From The Construction Position) Of A Steel/System Supporting Substructure. It Must Transfer Dynamic And Static Forces (Wind Pressure, Operational Loads According To Pn-En Standards) To The Existing Bench Frame; - Welding And Locksmith Works And Anti-Corrosion Protection: Assembly Of The Substructure In The Field On Facilities Not Prepared For This Type Of Work. This Requires Local Cleaning, Welding/Screwing And Then