Request For Quotation Network Cable Cat 5E Internal (Coil 305 Meter) (Product To Be Agreed With The Customer). When Delivering Goods And Performing Work,

Network Cable Cat 5E Internal (Coil 305 Meter) (Product To Be Agreed With The Customer). When Delivering Goods And Performing Work, The Supplier Is Obliged To Provide A Certificate Of Origin For The Goods. If The Product Is Of Kazakhstan Origin, Then The Supplier Is Obliged To Provide The St-Kz Certificate. If The Product Is Imported, Then A Certificate Of Origin Of The Product Issued By The Relevant Authorized Body Of The Country Of Origin Is Provided. The Product Must Meet The Above Standards. The Supplier Must Deliver The Goods To The Destination And Unload The Goods At The Address. Delivery Of Goods By Mail Is Strictly Not Accepted., Steel Bends With Coupling And Lock Nut Dn 65 Mm Assembled And Other Plumbing Fittings For Pipes. To Be Approved By The Customer 87025286815, 87716959092, 3 Way Valves. Thread Diameter: 1/2, Material: Brass, Connection: Threaded, Area Of Application: Water Supply, Heating, Depth: 50Mm, Weight (Without Packaging): 0.201 Kg, Three-Way Valve Aquasfera 012-0095 Is Designed For Connecting A Working Pressure Gauge To Heating Systems, Cold And Hot Water Supply In Utility And Drinking Networks And Industrial Technological Pipelines. The Model Is Equipped With A Flange For A Pressure Gauge. The Body And Stop Plug Are Made Of High-Quality Hot-Pressed Brass, The Washer, Screw And Nut Are Made Of Structural Steel, The Seal Is Made Of Polytetrafluoroethylene. To Be Approved By The Customer 87025286815, 87716959092, Brass Ball Valve Handle Lever And Butterfly Internal/Internal. To Be Approved By The Customer 87025286815, 87716959092, Cast Iron Valve Du-100 (Ru-16) Diameter (Mm): 100 Pressure: 16 Atm Length (Mm): 230 Working Medium: Water, Steam Number Of Holes: 8 Diameter Of Holes (Mm): 18 Weight (Kg): 30.5 Gate Valve 30Ch6br Is Designed For Installation As A Shut-Off Device On Pipelines. Delay Type 30Ch6br-Parallel With A Retractable Spindle. Connection To The Pipeline Is Flanged. Installation Position Is Any, Except For The Position With The Flywheel Down. The Working Medium Can Be Supplied From Either Side Of The Valve. The Operating Medium Temperature Is No More Than +225 C. The Total Average Service Life Is At Least 10 Years. To Be Approved By The Customer 87025286815, 87716959092, Horizontal Single-Stage Pumps Sd Are Designed For Pumping Wastewater, Both Domestic And Industrial, As Well As Other Contaminated Liquids. These Pumps Can Handle Liquids With A Ph Ranging From 6 To 8.5, A Density Of Up To 1050 Kg/M³, And A Temperature Of Up To 353 K (80 °C). They Effectively Pump Liquids Containing Abrasive Particles Up To 1% By Volume, The Size Of Which Does Not Exceed 5 Mm, With A Microhardness Of Up To 9000 Mpa. Sd Type Pumps Can Be Equipped With Both An Stuffing Box And A Mechanical Shaft Seal. Gray Cast Iron Is Used To Manufacture Parts Of The Flow Path, Which Provides The Necessary Strength And Resistance To Loads Arising During Operation. These Pumps Are Ideal For Applications That Require Reliability And Durability When Pumping Dirty And Abrasive Fluids. The Main Feature Of The Sd Pump Is Its Ability To Effectively Handle Liquids That Have Impurities Or Low Flow Rates, Which Makes It Indispensable In Situations Where Continuous And Stable Movement Of Liquid Is Required. This Is Especially Important In Systems Where Short-Term Interruptions In Supply Are Possible, For Example, When Emptying Tanks Or During Operation Of Pumping Stations. The Operating Principle Of Such A Pump Is To Use Centrifugal Force To Create Pressure, Which Sets The Liquid In Motion. This Allows Sd Pumps To Provide High Performance In A Relatively Compact Size, Which Is Ideal For Installation In Confined Spaces. To Be Approved By The Customer 87025286815, 87716959092