Request For Quotation Products With Technical Specifications

Plate On A Universal Drill Cutter Thickness 5 Mm Plates Cutters Made Of Hard Alloys, With Mechanical Fastening Of Plates, Are Used In Metal Turning. All Characteristics Of The Plates Must Match The State Standardgost 18879-73, Gost 18874-73, Gost 18875-73, Gost 18882-73, Plate For Internal Threading Cutter, Thickness 3 Mm Plates Cutters Made Of Hard Alloys, With Mechanical Fastening Of Plates, Are Used In Metal Turning. All Characteristics Of The Plates Must Match The State Standardgost 18879-73, Gost 18874-73, Gost 18875-73, Gost 18882-73, Plate On Boring Cutter Thickness 3 Mm Plates Cutters Made Of Hard Alloys, With Mechanical Fastening Of Plates, Are Used In Metal Turning. All Characteristics Of The Plates Must Match The State Standardgost 18879-73, Gost 18874-73, Gost 18875-73, Gost 18882-73, Plate For Cutting Cutter, Thickness 3 Mm Plates Cutters Made Of Hard Alloys, With Mechanical Fastening Of Plates, Are Used In Metal Turning. All Characteristics Of The Plates Must Match The State Standardgost 18879-73, Gost 18874-73, Gost 18875-73, Gost 18882-73, Plate On A Pass-Through Finishing Cutter At An Angle Of 35 Degrees, Thickness 3 Mm Plates. Cutters Made Of Hard Alloys, With Mechanically Fastened Plates, Are Used In Metal Turning. All Characteristics Of The Plates Must Match The State Standardgost 18879-73, Gost 18874-73, Gost 18875-73, Gost 18882-73, Plate On A Straight Line Roughing Thickness 3 Mm Plates Cutters Made Of Hard Alloys, With Mechanical Fastening Of Plates, Are Used In Metal Turning. All Characteristics Of The Plates Must Match The State Standardgost 18879-73, Gost 18874-73, Gost 18875-73, Gost 18882-73, Plate On Straight Through Roughing Ser2020k16 Thickness 3 Mm Plates Cutters Made Of Hard Alloys, With Mechanical Fastening Of Plates Are Used In Metal Turning. All Characteristics Of The Plates Must Match The State Standardgost 18879-73, Gost 18874-73, Gost 18875-73, Gost 18882-73, Plate For Thread-Cutting Cutter Ser2020k16 Thickness 3 Mm Plates Cutters Made Of Hard Alloys, With Mechanical Fastening Of Plates, Are Used In Metal Turning. All Characteristics Of The Plates Must Match The State Standardgost 18879-73, Gost 18874-73, Gost 18875-73, Gost 18882-73, Capralactam Rod, Diameter 80 Mm, Is A Product Of High Strength And Wear Resistance, Which Is Indispensable In The Production Of Rubbing Parts, Such As Bearings. Caprolon Withstands Exposure To Various Chemicals, Solvents, Alcohols, Ethers And Diluted Acids. Polycaproamide, Plexiglas Safety Glasses