Request For Quotation Purchasing Household Goods By Lot

Cordless Drill/Screwdriver, Designed For Drilling Holes And Working With Fasteners (Tightening/Unscrewing)., Type Of Material: Rolled Bitumen-Polymer Roofing Material4 Brand Tkp5 Weight 1 M² 4.0 Kg ±5%6 Roll Length 10 M7 Roll Width 1.0 M8 Material Area Per Roll 10 M²9 Base Fiberglass10 Top Protective Coating Coarse Mineral Coating (Slate)11 Bottom Protective Coating Polymer Film With Logo12 Weight Of Binder On The Welded Side Not Less Than 1.5 Kg/M²13 Water Absorption In 24 Hours No More Than 1% By Weight14 Heat Resistance At Least 85 °C15 Flexibility Temperature On The Beam R=25 Mm Not Higher Than −15 °C16 Waterproof Must Withstand Pressure Of At Least 0.2 Mpa For 2 Hours17 Breaking Force In The Longitudinal Direction Not Less Than 700 N18 Breaking Force In The Transverse Direction Not Less Than 700 N19 Thickness About 3.9–4.0 Mm20 Method Of Application Deposition21 Area Of Application Roofing Work, Installation Of Roofing Carpet, Waterproofing22 Product Condition New, No Damage23 Packaging Factory Packaging, Roll24 Unit Of Measurement Roll25 Amount Of Material Per Roll 10 M², Type Of Material Bitumen Primer3 Mark No. 014 Type Ready-To-Use Bitumen Primer5 Composition Solution Of Petroleum Bitumen In Organic Solvents6 Purpose: Priming Bases Before Installing Roofing And Waterproofing7 Substrates Concrete, Cement-Sand Screed And Other Insulated Surfaces8 Method Of Application: Brush, Brush Or Roller9 Flow Rate 0.25–0.35 L/M²10 Application Temperature −20 To +40 °C11 Drying Time No More Than 12 Hours Under Standard Conditions12 Mass Fraction Of Non-Volatile Substances 60–65%13 Conditional Viscosity 10–30 S14 Softening Temperature Along The Ring And Ball Is Not Less Than 70 °C15 Appearance Homogeneous Liquid Without Visible Foreign Inclusions16 Penetration High17 Flammability Group G418 Flammability Group B319 Flame Propagation Group Rp420 Packaging Volume At Least 24 L21 Type Of Packaging Sealed Factory Metal Container22 Product Condition New, Not Used23 Shelf Life Within The Period Established By The Manufacturer24 Labeling The Container Must Indicate The Name Of The Material, Brand, Manufacturer, Batch, Date Of Manufacture, Volume And Safety Information25 Contents Primer - 1 Container, Name: Assembly Adhesive “Liquid Nails”.Purpose: For Reliable Gluing Of Building And Finishing Materials To Various Substrates.Basic Technical Requirements:Type - Assembly Adhesive “Liquid Nails”;Base - Polymer;Color - White Or Beige;Packaging - Tube/Cartridge Of At Least 300 Ml;Application - Using A Standard Mounting Gun;Suitable For Gluing Wood, Mdf, Chipboard, Plastic, Ceramics, Metal, Concrete, Brick And Other Building Materials;Provides Strong Adhesion To The Surface;Setting Time - No More Than 30 Minutes;Complete Drying - In Accordance With The Manufacturers Instructions;The Glue Must Be Suitable For Interior Repair And Finishing Work;Consistency - Homogeneous, Without Lumps Or Foreign Inclusions;Shelf Life: At Least 12 Months From The Date Of Delivery;The Packaging Must Be Sealed, Without Damage Or Traces Of Tampering.Delivery Set: Mounting Adhesive “Liquid Nails” - 1 Pc.Warranty/Shelf Life: In Accordance With Manufacturers Requirements., Anchor Type Anchor Bolt With Nutanchor Material Steelanchor Diameter 8 Mmanchor Length 65 Mmcondition Newsleeve Anchorlightweight Sleeve Anchor For Through-Hole Installation. When The Hex Nut Or Bolt Is Tightened, The Flare Bolt Moves Into The Spacer And Forces It Against The Sides Of The Drilled Hole., Set Of Cutting Discs (125X1.0X22.2) 10 Pcs For Metal, Construction Polyurethane Foam 750 Ml, Brush Whitewash Brush, Self-Tapping Screws For Drywall With Frequent Threads Are Made Of Galvanized Steel 3.5 X 16, Self-Tapping Screws For Drywall With Frequent Threads Are Made Of Galvanized Steel 3.5 X 19, Self-Tapping Screws For Drywall With Frequent Threads Are Made Of Galvanized Steel 3.5 X 55, Self-Tapping Screws For Drywall With Frequent Threads Are Made Of Galvanized Steel 3.8 X 64, Self-Tapping Screws For Drywall With Frequent Threads Are Made Of Galvanized Steel 3.8 X 70, Self-Tapping Screws For Drywall With Frequent Threads Are Made Of Galvanized Steel 4.2 X 70, Self-Tapping Screws For Drywall With Frequent Threads Are Made Of Galvanized Steel 3.5 X 25, Self-Tapping Screws For Drywall With Frequent Threads Are Made Of Galvanized Steel 3.5 X 32, Self-Tapping Screws For Drywall With Frequent Threads Are Made Of Galvanized Steel 3.5 X 35, Self-Tapping Screws For Drywall With Frequent Threads Are Made Of Galvanized Steel 3.5 X 41, Self-Tapping Screws For Drywall With Frequent Threads Are Made Of Galvanized Steel 3.5 X 45, Self-Tapping Screws For Drywall With Frequent Threads Are Made Of Galvanized Steel 3.5 X 51