Request For Quotation • Purpose: Termination Of 2 Copper Wires By Crimping.• Cross-Section: 2 × 1.5 Mm².• Flange Color: Red (For Length 12 Mm; For Length 8 Mm - Brown)

• Purpose: Termination Of 2 Copper Wires By Crimping.• Cross-Section: 2 × 1.5 Mm².• Flange Color: Red (For Length 12 Mm; For Length 8 Mm - Brown).• Length Of The Contact Part (Sleeve): 12 Mm (Total Length Is Longer).• Material: Copper With A Protective Tinned Coating.• Insulation: Pvc (Polyvinyl Chloride).• Rated Voltage: Up To 400 V.• Operating Temperature: -40 °C To +80 °C.• Quantity Per Package: Usually 100 Pcs., • Purpose: Termination Of 2 Copper Wires By Crimping.• Cross-Section: 2 × 1.5 Mm².• Flange Color: Red (For Length 12 Mm; For Length 8 Mm - Brown).• Length Of The Contact Part (Sleeve): 12 Mm (Total Length Is Longer).• Material: Copper With A Protective Tinned Coating.• Insulation: Pvc (Polyvinyl Chloride).• Rated Voltage: Up To 400 V.• Operating Temperature: -40 °C To +80 °C.• Quantity Per Package: Usually 100 Pcs., White M6 Body Washer Din9021 • Size: M6 (Fastener Thread Diameter)• Type: Body (With Wide Brim / Increased Outer Diameter)• Standard: Din 9021 (Analogous To Gost 6958-78)• Color / Finish: White, Galvanized (Electrolytically) Galvanized / White Zinc• Purpose: Connecting Mounting Elements, Cable Trays, Reducing And Uniformly Distributing Pressure On The Material, Clamp 4.8X160mm Nylon Black Iek• Size: Width 4.8 Mm, Length 160 Mm.• Material: Polyamide (Nylon 6.6), Halogen-Free, Self-Extinguishing.• Colour: Black (Uv Resistant).• Maximum Coverage Diameter: Up To ~42 Mm.• Operating Temperature: From -25°C To +75°C (Or Wider Depending On The Modification)., Signal Lamp Ls-47 (Green) (Neon) Iek• Color: Red• Lamp Type: Neon• Rated Operating Voltage: 230 V (Ac, 50 Hz)• Modular Width: 1 Module (18 Mm)• Degree Of Protection: Ip20• Mounting: On 35 Mm Din Rail• Current Consumption: ~0.02 A• Maximum Power: 0.5 W, Signal Lamp Ls-47M (Yellow) (Matrix) Iek• Color: Red• Lamp Type: Neon• Rated Operating Voltage: 230 V (Ac, 50 Hz)• Modular Width: 1 Module (18 Mm)• Degree Of Protection: Ip20• Mounting: On 35 Mm Din Rail• Current Consumption: ~0.02 A• Maximum Power: 0.5 W, • Purpose: Termination Of 2 Copper Wires By Crimping.• Cross-Section: 2 × 1.5 Mm².• Flange Color: Red (For Length 12 Mm; For Length 8 Mm - Brown).• Length Of The Contact Part (Sleeve): 12 Mm (Total Length Is Longer).• Material: Copper With A Protective Tinned Coating.• Insulation: Pvc (Polyvinyl Chloride).• Rated Voltage: Up To 400 V.• Operating Temperature: -40 °C To +80 °C.• Quantity Per Package: Usually 100 Pcs., Tip-Sleeve E1508 1.5Mm2 With Insulated Flange (Red) Iek, Ring Tip Nki 6.0-8, Busbars On A Din Rail In A Housing (Cross-Module) L+Pen 2X7 Iek, Infrared Motion Sensor Dd 009 1200W 180 G.12M Ip44 White In Home), Contactor Kmi-11210 12A 230V/As3 1No Iek, Contactor Kmi-11210 12A 230V/As3 1No Iek, Signal Lamp Ls-47 Modular Red Neon Iek, Switch 3 Positions 2No Black Master Iek, Control Button Mushroom Φ40mm Self-Assembling. Np2-Bc42 Without Backlight Red 1Nc, Ip40 (Analogue Ch574846, Chint, Type-Set Clamp Zni-4Mm2 Gray Iek, Type-Set Clamp Zni-4Mm2 Blue Iek, Typesetting Clamp Zni-4 Pen, Plastic Plug Zni-4Mm2 Gray Iek