Tenders Are Invited For Delivery Of A Brand New Wheeled Excavator

1. The Subject Of The Order Is Delivery Of A Brand New Wheeled Excavator 2. The Subject Of The Order Should Meet, In Particular, The Following Conditions: Requirements - Parameters Necessary To Qualify The Offer: 1) Brand New Excavator - Year Of Production Not Earlier Than 2026. 2) Machine Weight - 6 T. To 7 T. 3) Engine Meeting The Standard - Min. 5 Euro 4) Fuel - Diesel 5) Engine Power - Min. 48Kw/60 Hp 6) Digging Force - Min. 30 Kn 7) Fuel Tank At Least 130 L 8) Hydraulic Oil Tank Capacity - Min 120 L 9) Maximum Driving Speed - Min 22 Km/H 10) Maximum Digging Range Not Less Than 6500 Mm 11) Maximum Digging Depth Not Less Than 3500 Mm 12) Maximum Digging Height Not Less Than 6500 Mm 13) Maximum Height Dumping Capacity Not Less Than 4500 Mm 14) Minimum Turning Radius At The Front Not More Than 2300 Mm 15) Minimum Turning Radius At The Rear Not More Than 1700 Mm 16) Operating Pressure In The Hydraulic System Not Less Than 24 Mpa 17) Total Length Up To 6000 Mm 18) Total Width Up To 2100 Mm 19) Total Height Up To 2900 Mm 20) Equipped With A Front Bulldozer With A Minimum Width Of 1900 Mm 21) 700 Mm Wide Bucket With A Capacity Of Not Less Than 0.2 M3 22) 500 Mm Wide Bucket 23) 1200 Mm Wide Hydraulic Bucket 24) Swivel Quick Coupler 25) Air-Conditioned And Heated Cabin 26) Lighting Allowing The Excavator To Move On Public Roads, 27) Warning Lamp Sending Yellow Flash Signals 28) Front Work Lights 29) Operating Manual In Polish 30) Warranty From The Date Of Signing The Handover Protocol By The Parties, Not Less Than 12 Months Or Until 1,000 Engine Hours, Depending On Which Of These Events Occurs First. 31) The Ordering Party Requires That The Authorized Stationary Service Point Be Located At A Distance Of No More Than 60 Km From The Ordering Partys Headquarters. 32) The Excavator Must Have An Approval Certificate With Documentation Confirming Compliance With Ce Standards. 33) Conducting Instruction/Training For The Ordering Partys Operators In The Operation And Maintenance Of The Machine. 3. Other Requirements Regarding The Subject Of The Order Are Described In Annex No. 4 To The Swz - Contract Template.