Tenders Are Invited For Purchase Of Containers For Selective Waste Collection In Order To Retrofit The Municipal Pszok In Warka

The Subject Of The Order Is The Sale And Delivery Of 12 Containers (10 Pieces - Small Hook; 2 Pieces - Large Hook, All With A Capacity Of 18 M3) For Collecting Waste At The Selective Municipal Waste Collection Point Run By Zakład Usług Komunalnych W Warce Sp. Z O. O. 1. Technical Parameters Of The Containers: 1) Specification Of The Kp 18 M3 Container (Small Hook) 10 Pieces: - Internal Dimensions Of The Box In Mm: 4000 X 2300 X 2000 (Length X Width X Height), - Kp-18 Hook, Roller, Open Container, - Hook Loading System: 1200 Mm, Hook Hook Rod ∅ 35 Mm St. 355, - Capacity: 18 M3, - Runners Upn 160 Mm, - Track Rollers ∅ 160 Mm X 6 Mm, L 150 Mm, Central Lubrication In The Pin, - Runner Spacing: 1020 Mm, - Sheet S235jr+N, Floor 5 Mm, Walls 3 Mm, - Bottom Ribs: C-Section 80 Mm X 50 Mm X 3 Mm, - Profile Rim 100 Mm X 50 Mm X 3 Mm, - Vertical Wall Ribs Approximately Every 890 Mm: C-Section 80 Mm X 50 Mm X 3 Mm, - Horizontal Wall Ribs C-Section 80 Mm X 40 Mm X 3 Mm, - Double-Leaf Doors On Triple Doors Hinges, Each Hinge Equipped With A Grease Nipple, Central Locking, - Color According To The Ral 6001 Palette - Hooks For Tarpaulin Or Mesh Around The Perimeter Of The Container Below The Upper Edge, - Container Entirely Welded With A Continuous Weld, - Walls Made Of One Sheet Of Metal, - Joining The Side Wall And Floor - Overlap On The Wall Of The Container At A Minimum Height Of 35 Cm From The Bottom.2) Specification Of The Kp 18 M3 Container (Large Hook) 2 Pieces: - Internal Dimensions Of The Box In Mm: 6500 X 2300 X 1200 (Length X Width X Height), - Kp-18 Hook, Roller, Open Container, - Hook Loading System: 1570 Mm, Hook Hook Rod ∅ 50 Mm, St 355, - Capacity: 18 M3, - Skids I-Beam Ipn 180 Reinforced In The Middle Part And Front, - Rollers ∅ 160 Mm X 6 Mm, L 300 Mm, Central Lubrication In The Pin, - Skid Spacing: 1060 Mm, - Sheet S235jr+N, Floor 5 Mm, Walls 3 Mm, - Bottom Ribs: Profile 80 Mm X 80 Mm X 3 Mm, - Bottom Reinforcement: Flat Bar 80 Mm X 8 Mm Between Ribs - Rim Profile 80 Mm X 80 Mm X 5 Mm, - Vertical Wall Ribs Every Approximately 670 Mm: C-Section 80 Mm X 50 Mm X 3 Mm, - Double Doors On Two Double Hinges, Each Hinge Equipped With A Grease Nipple, - Each Door Equipped With A Separate Closing Handle And Central Locking (Lower Door Lock), - Lower Door Lock Equipped With Forged Hooks, - Ladder On The Front Wall On The Left Side In The Direction Of Travel, - Color According To The Ral 6001 Palette - Hooks For Tarpaulin Or Mesh Around The Perimeter Of The Container Below The Upper Edge, - Container Entirely Welded With A Continuous Weld, - Walls Made Of A Maximum Of Two Sheets Of Sheet Metal, - Connection Of The Side Wall And Floor - Overlap On The Container Wall At A Minimum Height Of 35 Cm From The Bottom.2.General Requirements Regarding The Subject Of The Order: Basic Requirements For The Supplied Equipment: Brand New, Undamaged, Technically Functional, Meeting The Requirements Of The Din 30722 Standard Or Equivalent. The Subject Of The Order Should M