Tenders Are Invited For Motor Vehicles – Procurement Of 3 X Prison Transport Cabin Vehicle

Motor Vehicles – Procurement Of 3 X Prison Transport Cabin Vehicle. 1. Number: 3 2. Vehicle Requirements The Base Vehicle Is A 5.0T - 5.5T Panel Van With Rear Wing Doors And A Sliding Door On The Right With A Window And A Window On The Left Side. The Vehicle Complies With The Current Emissions Standard. The Vehicle Must Be Equipped With 4 Vehicle Keys Per Vehicle. Motorization And Transmission Diesel Engine With At Least 135 Kw. The Engine Must Comply With The Latest Euro Emissions Standard, In Conjunction With An Automatic Transmission. The Tank Capacity Must Be At Least 70 Liters. Vehicle Dimensions Length Max. 7400Mm Width Max. 2550Mm Height Max. 3000Mm Wheelbase Approx. 4600Mm Perm. Total Mass Max. 6000 Kg Payload Min. 1200 Kg An Empty Weight Calculation Including A Driver Weight Of 95Kg (Instead Of 75) Must Be Proven. Safety - Abv (Automatic Anti-Lock System) - Asr (Anti-Skid Control) - Esp (Electrical Stability System) - Tpms (Tire Pressure Monitoring System) - Front Airbags For Driver And Front Passenger - Side And Head Airbags If Possible - Grab Handles For Driver/Front Passenger Entry Driver Assistance Systems - Automatic Cruise Control System (Tempomat) With Distance Control - Distance And Emergency Braking Assistants That Can Be Deactivated Or Overridden By Driver Intervention - 360° Reversing Camera With Rear Parking Aid - Front Parking Aid - Blind Spot/Lane Keeping Assistant (Or Comparable Technology With A Different Name) - Crosswind Assistant - Turn Assistant - Rain Sensor - Digital Interior Mirror Chassis - A Chassis Designed For Continuous Use With The Permissible Total Weight. Electrical Equipment - 2Nd Battery (At Least 100 Ah, 450 A) For The Installation/Expansion (E.G. Radio System, The Cell Tract And The Auxiliary Heater) - Isolation Relay And Undervoltage Monitor - The Installation/Expansion Can Be Disconnected From The 2Nd Battery Using A Battery Disconnect Switch (Installed On The Left Of The Drivers Seat). If Necessary, This Can Be Switched On Using A Push Button Switch To Start The Engine. - Electrical Interfaces (Terminal Strip) For External Use For Special Expansion - Electrical Connections In The Cockpit (12V Sae J563 Socket And Usb Charging Port) - Electrically Adjustable And Heated Exterior Mirrors - The Replica Of A Signaling System Must Be Taken Into Account When Wiring And The Electrical System Must Be Prepared Accordingly Lighting - Led Headlights (Or Xenon) With Led - Daytime Running Lights And Automatic Driving Lights - Side Marker Lights - Led Ambient Lighting Above The Sliding Door (Lights Up When Opening) - 2 Additional Reading Lights In The Drivers Cab (Front Passenger + Accompanying Seat) - High Beam Assistant Radio And Radio System - 2 Independent Radio Systems (Drivers Compartment And Passenger Compartment Can Be Controlled Separately) - In The Drivers Cab With Rds And Dab+, Bluetooth Hands-Free Function (For Using The Company Telephone) - Preparation For Radio And Installation Of A Radio Device Procured By The Customer (Holder With Charging Function) - Steering Wheel Remote Control/Multifunction Steering Wheel - Navigation System - Andro