Tenders Are Invited For Reconstruction Of Municipal Road No. 107124L In Polanówka On The Section From Km 0+500 To Km 1+540

The Subject Of The Order Is The Performance Of Construction Works: Reconstruction Of Municipal Road No. 107124L In Polanówka On The Section From Km 0+500 To Km 1+540. The Following Works Are To Be Performed On A Section Of 990 M: 1) Preparatory Works, 2) Demolition Works, 3) Earthworks, 4) Base: Recycled Basic Base With A Hydraulic Binder (Cement-Emulsion Mixture) (On-Site Recycling, 30 Cm Thick) Using Reclaimed Material From The Existing Bituminous Layers Together With The Underlying Structural Layers Of The Surface With Possible Additional Granulation After Previously Taking A Sample From The Road Structure In Order To Develop A Recipe, A Layer Of Mechanically Stabilized Crushed Aggregate 0-31.5 Mm Thick. 7 Cm After Compaction5) Surface: Cleaning And Sprinkling Non-Bituminous Construction Layers With Cold Asphalt Emulsion, Making An Asphalt Concrete Surface, Binding Layer Ac 16W 50/70 Kr 2 Gr. 5 Cm, Cleaning And Sprinkling Bituminous Construction Layers With Cold Asphalt Emulsion, Making Asphalt Concrete Surface: Wearing Course Ac 11S 50/70 Kr 2 Gr. 4 Cm, Sprinkling The Edges Of The Surface With Asphalt, 6) Finishing Works: Strengthening The Slopes Of The Ditch With Openwork Slabs 40X60x8 Cm On A Sand Bed, Thickness. 10 Cm With Filling Of Holes With Native Soil And Profiling Of The Counterslope, Hardening Of The Roadsides With Aggregate Mixtures With A Grain Size Of 0/31.5 Mm Thick. 8 Cm After Compaction, Planting Of Slopes And Bottoms Of Excavations, 7) Vertical Marking - Posts Made Of Galvanized Pipes, Diameter. 50 Mm With A Boom – 4 Pcs., Without A Boom – 2 Pcs. Sign Shields – 9 Pcs.: 1St Generation Reflective Foil, Size – Small And Medium. The Following Characters Can Be Set: A) C-13/C-16 + C-13A/C-16A - 2 Sets. (2 Shields + Pole With Boom),B) D-1 + T-6A – 1 Set. (2 Shields + Pole With Boom),C) A-1 – 1 Set. (Shield And Post),D) A-2 – 1 Set. (Shield + Pole With Boom)E) U-3A – 1 Set. (Shield And Post)F) Rigid Protective Railings U11a, Galvanized Slotted 2 M - 880 M8) Horizontal Road Marking With Chemically Hardened Materials - Edge Line. The Detailed Scope, Requirements And Conditions For The Execution Of The Works Covered By The Subject Order Are Specified In The Detailed Design, Bill Of Quantities And Technical Specifications For The Execution And Acceptance Of Construction Works, Constituting Annexes To This Swz. The Detailed Scope, Requirements And Conditions For The Performance Of The Works Covered By The Subject Order Are Specified In The Technical Design, Bill Of Quantities And Technical Specifications For The Execution And Acceptance Of Construction Works, Constituting Annexes To This Swz. The Contractors Obligations Under The Task And The Offer Price Include: 1) Execution Of The Subject Of The Contract In Accordance With The Design Documentation, Construction Practice And Principles Of Technical Knowledge, Applicable Standards And Construction Law Provisions, On The Terms And Conditions Set Out In This Contract And With Due Care And