Tenders Are Invited For Reconstruction Of The Intersection Of Municipal Road No. 112255E With National Road No. 42 And Reconstruction Of The Intersection Of Municipal Road No. 112254E With National Road No. 42

1. The Subject Of The Order Is The Reconstruction Of The Intersection With National Road No. 42 Located On Plots With Registration Numbers 852/2, 852/1, 857/1, 732/1 (Rzejowice District). As Far As The Reconstruction Of The Intersection Is Concerned, It Is Planned To Construct A 5.00 M Wide Municipal Road With Both Sides Of The Road With A Crushed Aggregate Surface, 0.75 M To 1.0 M Wide, And Rebuild A Culvert Made Of Pehd Pipes Ø500 Mm, 14.50 M Long. The Edges Of The Road Of The Municipal Road At The Intersection Should Be Rounded With Radii R = 8.00 M. Additionally, Along The Planned Road Of The Municipal Road, The Existing Roadside Ditches Are Planned To Be Reconstructed And Their Reinforcement With Openwork Slabs. Additionally, Along The Road Of The National Road, It Is Planned To Clean And Desilt The Existing Roadside Ditch Along A Length Of 20 M. 2. The Subject Of The Order Is The Reconstruction Of The Intersection With National Road No. 42 Located On Plots With Registration Numbers 421, 376/2, 375 (Józefów District). Due To The Condition Of The Existing Surface, The Reconstruction Of The Road Will Include The Construction Of A New, Full Road Structure Of The Municipal Road. As Part Of The Reconstruction, It Is Envisaged To Construct A Section Of The Municipal Road With A Length Of 19.45 M, With A Mineral-Bituminous Surface With A Road Width Of 5.00 M, Along With Both Sides Of Crushed Aggregate Shoulders With A Width Of 0.75 M To 1.00 M. The Intersection Of The Municipal Road With The National Road Should Be Rounded With Radii R = 6.0 M And R = 10.00 M. Due To Reconstruction Of The Municipal Road, It Is Not Planned To Replace The Road Structure Of The National Road - Only Milling Is Planned At The Connection Of The Intersection With A Width Of 1.7 M And A Length Of 31 M. Make The Connection With The National Road Road In A Stepped Manner In Accordance With The Drawing Detail. At The Connection Between The Road Surface Of The Municipal Road And The Road Of The National Road, Use A Geogrid Of Min. 80/80 Kn/M. Additionally, At The Connection Of Wearing Surfaces, Use A Polymer-Asphalt Tape To Fill The Vertical Joint. As Part Of The Reconstruction, It Is Also Necessary To Make Double-Sided Roadsides Made Of Crushed Aggregate With A Width Of 00.75 M To 1.0 M And Repair The Culvert Made Of Pehd Pipes. The Culvert Should Be Made Of Corrugated Pipes Ø500 Pehd Sn 8. The Culvert Should Be Placed On A Foundation Made Of Aggregate. 50X20 Cm - Crushed Stone Fraction 0-31.5 Mm And Sand Bedding Thick. 5 Cm. The Culverts Should Be Secured At Their Ends With Paving Stones With Cement And Sand Mortar. In The Telecommunications Industry, The Reconstruction Of The Fiber Optic Network Of Nexera S.A. Is Planned. Through: - Elimination Of An Earth Micro-Sewer System With A 35 M Long Cable - Construction Of An Earth Micro Sewer System With A 27 M Long Cable.3.3 A Geodetic Inventory Should Be Performed For Both Reconstructions Of Intersections.