Tenders Are Invited For Performance Of Construction And Installation Works (Smr) On Site: Street From O.T. 275 To O.T. 278, According To The Plan Of The Town Of Lyaskovets

The Main Goal Of The Project Is To Improve The Transport-Operational Characteristics And Load-Bearing Capacity Of The Pavement Of The Street With Axis Points And Its Adjacent Sidewalks In The Town Of Lyaskovets, With A View To Ensuring Conditions For Traffic Safety, Comfort Of Travelers And Good Drainage.The Width Of The Street Varies From 3.45 M To 8.15 M, And The Terrain Is Uneven. There Are Partially Laid Concrete Curbs, No Sidewalks, And No Permanent Pavement On The Roadway.According To The Road Part, Excavation Activities Will Be Carried Out To Reach An Earth Bed On A Crushed Stone Pavement. The Cross Slope Of The Road Surface Is One-Sided 2.50%. The Construction Of The Asphalt Pavement Will Be Made Of 4 Cm - Dense Asphalt Concrete For Wearing Layer, 6 Cm - Loose Asphalt Mixture For Upper Base Layer And 45 Cm - Crushed Stone Road Base With Continuous Grain Size (0-63 Mm). The Drainage Of The Roadway Will Be Carried Out Superficially With A One-Sided Transverse Slope And A Suitable Longitudinal Slope, According To The Presented Drawing Situation. Geometrical Solution. Pavement Plan. Drainage Plan.The Asphalt Pavement Will Be Bounded By Concrete Curbs 15/25/50 Cm., Laid Lying On A Concrete Substrate C12/15 – 20/15 Cm, Along The Entire Length On The Right And Partially On The Left, According To Details 1, 2 And 3 Of The Drawing Detail Curbs - Sheet 5.Partial Construction Of Sidewalks With A Width Of 0.85 M To 2.00 M With A Cross Slope Of 2.00% Is Planned. Excavation Will Be Carried Out To Reach The Level Of The Pavement Earth Bed And Lay Structural Layers Of Unsorted Crushed Stone 0-40 Mm 15 Cm Thick, Sand 5 Cm Thick And Vibro-Pressed Paving Stones 20/10/6 Cm.The Types Of Works Are According To The Technical Specification, Investment Project And Cs, Attached In The Electronic File Of The Public Procurement.