Request For Quotation Monoblock Centrifugal Pump For Heating Systems.

Monoblock Centrifugal Pump For Heating Systems. Type Of Equipment: Centrifugal, Cantilever-Monoblock, Single-Stage. Purpose: For Pumping Water In Closed Heating Systems And Itp. Nominal Capacity (Feed): Range From 40 To 50 Cubic Meters. M/Hour. Nominal Head: Range From 25 To 30 Meters. Electric Motor Power Consumption: No More Than 7.6 Kw. Electrical Network Parameters: Three-Phase Voltage 380–400 V, Frequency 50 Hz. Shaft Rotation Speed: Nominal, About 3000 Rpm (Two-Pole Motor). Inlet Pipe Diameter (Flange): Nominal Diameter Dn 80 Mm. Outlet Pipe Diameter (Flange): Nominal Diameter Dn 65 Mm. Shaft Seal Type: Single Mechanical Seal (Stuffing Box Is Not Allowed). Maximum Ambient Temperature: Not Less Than +105 °C. Housing And Impeller Material: Gray Cast Iron (Or Heavy Duty Equivalent). Weight Of The Assembled Unit: No More Than 95 Kg. Compliance With Standards: Manufactured In Accordance With Gost 31839-2012 (Safety Of Pumps) Or Equivalents. ���� Additional Requirements For The Supplier (Recommended To Be Included): Contents: The Pump Unit Must Be Supplied Assembled With An Electric Motor On A Single Shaft (Monoblock Design), Ready For Installation. Documentation: The Supplier Is Obliged To Provide A Product Passport, An Instruction Manual In Russian (And Kazakh - When Purchasing In The Republic Of Kazakhstan) Languages, As Well As A Certificate Of Conformity Or Declaration Of Conformity With The Cu Tr. Warranty: The Warranty Period For The Supplied Equipment Must Be At Least 12 Months From The Date Of Commissioning. Before Sending, Agree With The Customer.