Request For Quotation Autonomous Fire Extinguishing Device

Plates For Panels Up To 20 L, The Product Must Be New, Previously Unused, Ready For Use;The Plates Must Be Designed For Autonomous Local Fire Extinguishing Inside Electrical Devices;The Product Must Operate Without An External Power Source And Without Human Intervention;Activation Of The Fire Extinguishing Element Must Occur Automatically Upon Exposure To Heat And/Or Exposure To An Open Flame Within The Parameters Established By The Manufacturer;Plates For Electrical Panels Must Provide The Declared Protected Volume Of Up To 20 Liters;The Extinguishing Agent Must Be Intended For Use In Electrical Equipment And Must Not Create A Conductive Residue That Could Cause An Additional Short Circuit;The Plate Must Be Made In The Form Of A Multilayer Structure, Including: A Functional Layer; Load-Bearing Layer; Fixing Layer.Product Service Life - At Least 5 Years, Subject To Storage And Operating Conditions;The Product And/Or Packaging Must Be Marked To Identify The Manufacturer, Name/Type Of Product And Batch, Or The Date Of Manufacture, If Such Marking Is Provided By The Manufacturer.Documents Confirming Product Compliance With Mandatory Requirements;Manufacturers Documents;Technical Description Of Products;Safety Data Sheet;Test Reports;Conformity Marking.The Product Is Supplied In The Quantity And Range Specified In This Technical Specification;The Product Must Be Free Of Damage, Signs Of Use And Other Defects That Prevent Its Intended Use;Acceptance Is Carried Out According To Quantity, Completeness, Marking, External Condition And The Presence Of The Provided Accompanying Documents;The Remaining Service Life On The Date Of Delivery Must Be At Least 90% Of The Service Life Declared By The Manufacturer., Autonomous Fire Extinguishing Plate For Sockets, Technical Requirements For The Product, The Product Must Be New, Not Previously Used, Ready For Use;The Plates Must Be Designed For Autonomous Local Fire Extinguishing Inside Electrical Devices;The Product Must Operate Without An External Power Source And Without Human Intervention;Activation Of The Fire Extinguishing Element Must Occur Automatically Upon Exposure To Heat And/Or Exposure To An Open Flame Within The Parameters Established By The Manufacturer;The Socket Plate Must Have Dimensions And Design That Allow Placement Inside An Electrical Socket;The Extinguishing Agent Must Be Intended For Use In Electrical Equipment And Must Not Create A Conductive Residue That Could Cause An Additional Short Circuit;The Plate Must Be Made In The Form Of A Multilayer Structure, Including: A Functional Layer; Load-Bearing Layer; Fixing Layer.Product Service Life - At Least 5 Years, Subject To Storage And Operating Conditions;The Product And/Or Packaging Must Be Marked To Identify The Manufacturer, Name/Type Of Product And Batch, Or The Date Of Manufacture, If Such Marking Is Provided By The Manufacturer. Set Of Documents For The Goodsdocuments Confirming Product Compliance With Mandatory Requirements;Manufacturers Documents;Technical Description Of Products;Safety Data Sheet;Test Reports;Conformity Marking.The Product Is Supplied In The Quantity And Range Specified In This Technical Specification;The Product Must Be Free Of Damage, Signs Of Use And Other Defects That Prevent Its Intended Use;Acceptance Is Carried Out According To Quantity, Completeness, Marking, External Condition And The Presence Of The Provided Accompanying Documents;The Remaining Service Life On The Date Of Delivery Must Be At Least 90% Of The Service Life Declared By The Manufacturer., Self-Contained Fire Cordthe Product Must Be New, Previously Unused, Ready For Use;The Cord Must Be Designed For Autonomous Local Fire Extinguishing Inside The Electrical Panel; The Product Must Operate Without An External Power Source And Without Human Intervention;The Cord Must Be Flexible And Allow Placement Inside Electrical Equipment;The External Structure Of The Cord Must Have Dielectric Properties And Be Suitable For Use In Electrical Equipment;Activation Of The Fire Extinguishing Element Must Occur Automatically Upon Exposure To Heat And/Or Exposure To An Open Flame Within The Parameters Established By The Manufacturer;The Corresponding Protected Volume Must Be Confirmed By The Manufacturer’S Technical Documentation And/Or Test Reports;The Extinguishing Agent Must Be Intended For Use In Electrical Equipment And Must Not Create A Conductive Residue That Could Cause An Additional Short Circuit;Product Service Life - At Least 5 Years, Subject To Storage And Operation Conditions, • Documents Confirming Product Compliance With Mandatory Requirements;Manufacturers Documents;Technical Description Of Products;Safety Data Sheet;Test Reports, The Product Must Be Free Of Damage, Signs Of Use And Other Defects That Prevent Its Intended Use;Acceptance Is Carried Out According To Quantity, Length, Completeness, Marking, External Condition And The Presence Of The Provided Accompanying Documents;The Remaining Service Life On The Date Of Delivery Must Be At Least 90% Of The Service Life Declared By The Manufacturer.