Tenders Are Invited For Thermal Modernization Of A Multi-Family Residential Buildingincluding The Replacement Of Windows And Doors And The Installation Of A Photovoltaic Installation (...) In Tomaszów Mazowiecki At Ul. Stolarska 33A.

1. The Subject Of The Order Is The Implementation Of An Investment Project Entitled: Thermal Modernization Of A Multi-Family Residential Building, Including The Replacement Of Windows And Doors And The Installation Of A Photovoltaic Installation In A Building Owned By Tomaszowski Tbs Spółka Z O.O. Located In Tomaszów Mazowiecki At Ul. Stolarska 33A.2.The Material Scope Of The Order Includes In Particular: 1) Thermal Modernization Of The Building, In Accordance With The Attached Audit And Construction Design, Including: - Dismantling The Existing Band Around The Building Made Of Paving Slabs With The Recovery Of The Slabs And Transporting Them To The Place Of Loading, I.E. The Ordering Partys Headquarters, - Thermal Modernization Of The Walls Of The Residential Building Filled With Styrofoam And Wool With A Thickness Of 7 And 14 Cm Depending On The Wall In Accordance With The Audit And Construction Design, Thermal Modernization Of The Walls Of The Plinth Of A Residential Building With Styrofoam Thickness. 14 Cm, - General Renovation Of Balcony Slabs In Accordance With The Construction Design, Including: (Removal Of Existing Balcony Layers, Construction Of New Slope Layers, Construction Of A Rubber Insulation Layer, Construction Of A Thermal Insulation Layer Of The Balcony Slab From The Bottom As Well As From The Top, Construction Of A Pressure Layer With A Terracotta Pressure Layer With A Minimum Thickness Of R10), Thermal Modernization Of Jambs With Styrofoam Thickness. Minimum 2 Cm With A Lambda Coefficient Of 0.036 W/(M*K), - Carrying Out The Necessary Sheet Metal Flashings Resulting From The Thickening Of The Walls - Standing Seam Flashings Made Of Coated Sheet Metal - Stiffening With An Osb Board From The Bottom, - Dismantling Canopies Over The Top-Floor Balconies - Construction Of Canopies For Recovery With Cleaning To The Third Degree With Anti-Corrosion Protection And Coating Chlorinated Rubber Top Paint, Installation Of Roofs After Thermal Modernization Of The Walls, After Previously Refreshing The Structure And Replacing The Chamber Plates With Thick Polycarbonate Plates. 16 Mm Along With Flashings At The Connection Between The Polycarbonate Wall Of The Building - Transparent Color, - Works Related To Lifting The Intercom Cassettes Onto The Finished Façade Of The Vestibule, - Facade Cladding With Tiles On The Plinth And The Front Wall Of The Vestibule, - Making The Necessary Flashings Of Roofs Made Of Coated Sheet Metal On All Elements Located Directly Next To The Walls Of The Vestibule, Including: Energy Cabinets, Gas Cabinets, Etc. - Making A Band Of Paving Stones On Sand And Cement Ballast Around The Building With A 2% Slope From The Building, 50 Cm Wide + Edging, - Elevating The Gutters And Downpipes On The Vestibules Forward And Replacing Them With Prior Preparation Of The Substructure Before Thermal Modernization Works On The Vestibules, - Painting All Steel Elements On The Facade And Balconies Chlorinated Rubber Paints.2) Thermal