Tenders Are Invited For Water Meters - Purchase Of Refurbished Water Meters Up To Dn30

Water Meters - Purchase Of Refurbished Water Meters Up To Dn30. Ii.2.4) Description Of Public Procurement: The Purpose Of This Public Procurement Procedure Is To Procure Refurbished Water Meters Up To Dn30, In A Total Quantity Of 25,000 Pieces, For Pannon-Víz Zrt. Until December 31, 2028 (+12 Months Extension Possible). Quantity Planned For Purchase Broken Down By Diameter: - Dn15 22,000 Pcs - Dn20 1,000 Pcs - Dn25 1,000 Pcs - Dn30 1,000 Pcs Total: 25,000 Pcs. 70% Of It Undertakes A Withdrawal Obligation During The Duration Of The Contract. Technical Requirements For Refurbished, Simple Manhole Water Meters In The Case Of Size Dn15-30 - The Hungarian Language Description And Technical Parameters Of The Products To Be Delivered Must Be Attached To The Offer (Technical Data Sheet And Installation Instructions) - The Refurbished Water Meter Must Have A Valid Type Test Permit According To The Mid 2014/32/Eu Directive And Meet The Parameters Established In This Permit. The Tenderer Shall Attach The Type Test Permit Of The Refurbished Water Meter For Meters Between Dn15-Dn30 To His Offer. - The Refurbished Water Meter Must Comply With The Regulation He 6/2-2021 Certification Regulation For The Measurement Of Drinking Water Of Water Meters Marketed On The Basis Of The Measuring Device Guideline Issued By The Hungarian Trade Licensing Office. The Water Meter Must Comply With The Provisions Of § 11 And § 12 Of Government Decree 5/2023 On Drinking Water Quality Requirements. - At The Time Of Delivery, The Refurbished Water Meter Must Have A Valid Mid Certification, The Year Of Which Must Not Be Earlier Than The Year Of Delivery. - The Refurbished Water Meter Must Be At Least R80 Have Ip68 Protection. - During Transport And Storage, The Connection Pieces Of The Refurbished Water Meter Must Be Airtight. - In Order To Reduce The Environmental Load, The Material Must Not Be Made Of Lead (Ce Mark, Additional Metrology Mark, The Year Of Manufacture, The Number Of The Certification, The R Span, And The Installation Position Marking) Are Either Placed On The Dial Or Completely Covered With A Cover Against External Damage. - Accepted Installation Lengths: Dn15: 170Mm, Dn20: 190Mm, Dn25: 260Mm, Dn30: 260Mm. It Was Produced By The Bidder By Completing The Following Work Processes Without Fail