Request For Quotation Purchasing A Fire Extinguisher And Stand

Powder Fire Extinguisher Op-5. Portable. The Mass Of The Fire Extinguishing Agent Is At Least 5.0 Kg. The Total Weight Of The Fire Extinguisher Is No More Than 7.5 Kg. The Fire Extinguishing Rank Is At Least 2A, 55B, C, E (Electrical Installations Under Voltage Up To 1000V). Working Pressure Of The Housing 1.4/Pm 0.2 Mpa (Control By Built-In Pressure Indicator/Pressure Gauge; Arrow In The Green Zone). The Duration Of The Otv Supply Is At Least 10 Seconds. The Length Of The Otv Jet Is At Least 3.0 Meters. Operating Temperature Range From -40C To +50C. The Set Includes A Charged Fire Extinguisher Op-5 With A Shut-Off And Starting Device (Zpu) And A Pressure Indicator. Flexible Spray Hose (Nozzles). Factory Receipt And Locking Seal. Product Data Sheet And Instruction Manual (For Each Fire Extinguisher). Masking: Clear Factory Markings On The Body Indicating The Date Of Manufacture, Date Of Filling, Weight, Extinguishing Class And Instructions For Use., Floor Stand (Stand) For A Fire Extinguisher (For Fire Extinguisher Op-5). Floor-Standing, Stationary, Vertical (Frame Or Box Type). Does Not Require Mandatory Fastening To Load-Bearing Walls. Designed To Install 1 Portable Fire Extinguisher Weighing Up To 10 Kg (Including Op-4 And Op-5). Height No Less Than 400Mm, No More Than 700Mm. Width Not Less Than 200Mm, Not More Than 260Mm. Depth Not Less Than 200Mm, Not More Than 260Mm. The Internal Diameter/Size For A Fire Extinguisher Is At Least 170-200Mm (Ensuring Free And Stable Installation Of Op-5). Material Of Manufacture: Sheet Steel Or Steel Metal Profile With A Thickness Of At Least 0.8-1.0 Mm. Wear-Resistant Powder-Polymer Coating, Resistant To Mechanical Stress, Temperature Changes And Humidity. The Color Is Signal Red (Ral 3000 Or Similar) In Accordance With Fire Safety Requirements. The Support Base Of The Stand Should Provide Maximum Stability On A Flat Floor (Without The Risk Of Tipping Over If Accidentally Touched). The Structure Should Not Have Sharp Edges, Corners Or Burrs. A Clear, Contrasting Designation Must Be Applied To The Front Side Of The Stand (Pictogram/Sticker “Fire Extinguisher” According To Gost)