Request For Quotation Purchase Of Car Accessories

A Car Battery Is Designed To Start A Car Engine, Provide A Stable Power Supply To The Standard Electrical Equipment Of The Vehicle And Operate Electrical Systems When The Engine Is Turned Off. The Product Must Be New, Previously Unused, Factory-Made, Not Refurbished, Not Used, Without Mechanical Damage Or Defects. Technical Characteristics: Battery Type - Lead-Acid Starter. Purpose: For Passenger Cars. Rated Voltage – 12 V. Capacity – 60 Ah. Starting Current – ​​Not Less Than 550A (En). Polarity – Straight (L+). Terminal Type – Standard European. Overall Dimensions - 242X174x190mm (Deviation Is Allowed Within The Manufacturers Requirements. The Case Is Made Of Impact-Resistant, Acid-Resistant Polypropylene. The Battery Must Be Completely Sealed, Maintenance-Free Or Low-Maintenance. Low Level Of Self-Discharge During Storage. High Resistance To Charge-Charge Cycles. High Resistance To Vibration Loads. Must Provide Reliable Starting The Engine At Low Temperatures. Must Comply With Safety Requirements And Environmental Standards. Product Manufacturing Date - No Earlier Than 2025-2026. Brand -60Ah 550A L+ Or Equivalent. Delivery Set: Battery - 1 Piece; Passport (Or Instruction Manual); Product Quality Requirements: The Supplied Product Must Comply With The Manufacturer’S Technical Specifications, Be Certified, Fully Ready For Use. , Without Traces Of Repair, Mechanical Damage And Hidden Defects. The Battery Must Have Factory Markings Indicating The Date Of Manufacture, Capacity, Starting Current, Voltage And Polarity. The Warranty Period Is At Least 12 Months From The Date Of Delivery Of The Goods., Motor Oil. Motor Oil Is Intended For Lubricating Gasoline And Diesel Internal Combustion Engines Of Passenger Cars, Protecting Engine Parts From Wear, Overheating, Corrosion And Deposit Formation, As Well As Ensuring Reliable Engine Operation In Various Climatic Conditions. Type Of Oil - Synthetic (Or Semi-Synthetic Depending On The Need). Packaging Volume - 5 Liters. Viscosity According To Sae - 5W-40 (Or According To The Requirements Of The Vehicle Manufacturer. Compliance With International Standards - Api Sn/Cf Or Higher. Compliance With Acea Az/B4 Or Equivalent. Must Provide Reliable Engine Protection Against Wear, Carbon Deposits And Corrosion. Must Have High Thermal-Oxidative Stability. Maintain Stable Viscosity Over A Wide Range Of Operating Temperatures. Viscosity. The Product Must Be New, Original, Factory-Made. Date Of Manufacture - No Earlier Than 2025-2026. Remaining Shelf Life At The Time Of Delivery - At Least 80% Of The Total Shelf Life. Delivery Set: Motor Oil - 1 Canister With A Volume Of 5 Liters. The Supplied Product Must Be Original, Not Previously Used. Sealed Original Packaging Without Damage. The Manufacturers Name, Viscosity, Volume, Batch Number, Production Date And Expiration Date Must Be Indicated On The Packaging., Gear Oil (Or Equivalent). Transmission Oil Is Intended For Lubrication Of Mechanical Gearboxes, Drive Axles, Gearboxes, Hypoid Gears And Other Transmission Units Of Cars, Tractors And Special Equipment. The Oil Must Provide Reliable Protection Of Transmission Parts From Wear, Corrosion, Scuffing And Deposit Formation, And Also Maintain Stable Performance Properties Under High Loads And A Wide Temperature Range. Type Of Oil - Transmission. Base - Mineral. Viscosity Grade –Tm -5-18(Gl-5) Or Equivalent. Type - Transmission, Mineral, All-Season.Classification - Tm-5-18. Designed For Lubrication Of Cylindrical, Bevel, Worm, Spiral Bevel And Hypoid Gears. Kinematic Viscosity At 100 °C - Not Less Than 17.5 Mm²/S. Kinematic Viscosity At 50 °C - 110–120 Mm²/S. Viscosity Index - Not Less Than 100. Flash Point In An Open Crucible - Not Lower Than +200 °C. The Pouring Point Is Not Higher Than –25 °C. Density At 20 °C - No More Than 0.907 G/Cm³. The Oil Must Have Extreme Pressure, Anti-Wear, Anti-Corrosion And Anti-Foam Properties. Packaging - Sealed, Factory. The Product Must Be New And Not Used.