Tenders Are Invited For Renovation Of The Municipal Building At Ul. Papieża Jana Pawła Ii 11 In Kamienna Góra

The Subject Of The Order Is The Execution Of Renovation And Thermal Modernization Works Of A Residential Building At Ul. Papieża Jana Pawła Ii 11 In Kamienna Góra. The Building Is Located On A Plot According To The Land Register No. 193/17, District 3 Of The City Of Kamienna Góra. The Building Is Located In The Area Covered By The Local Spatial Development Plan For The Area In The Area Of ​​Papieża Jana Pawła Ii And Mostowa Streets In Kamienna Góra - Resolution No. Xxvi/154/12 Of The City Council In Kamienna Góra Of November 29, 2012. A Detached Multi-Family Building, Two-Story, Partly With A Basement, With A Shape Similar To A Rectangle, Adjacent To Utility Rooms, Made In Traditional Technology With Walls Made Of Ceramic Bricks, A Brick Klein Ceiling Over Part Of The Basement, A Wooden Inter-Story Footing And A Flat Roof With A Wooden Structure, Covered With Roofing Felt On Full Boarding. The Building Is The Property Of The Kamienna Góra Municipality. There Are 4 Residential Premises In The Buildings. The Administrator Of The Buildings Is Spółka Mieszkaniowa Sp. Z O. O. In Kamienna Góra. As Part Of This Order, On The Basis Of The Developed Design Documentation Constituting An Annex To The Opz, It Is Envisaged To Carry Out Construction Works Regarding The Renovation And Thermal Modernization Of The Building At Ul. Papieża Jana Pawła Ii 11 Along With Accompanying Works, I.E.: The Scope Of Construction And Renovation Works In The Facility Includes: - Damp-Proof Insulation Of The External Walls Of The Building In Contact With The Ground - A Double-Row Horizontal Diaphragm Using The Crystal Injection Method, Filling Of Cement And Lime Plasters And Coating Insulation Of Vertical Walls, - Insulating The Wall In The Ground With Xps Polystyrene Foam. 10 Cm With A Coefficient Of Λ = 0.033 [W/(M·K)] Along With Laying Dimpled Foil, - Renovation Of The Buildings Facade By Breaking The Existing Plasters, Local Repair Of Walls And Thermal Insulation Of External Walls With Styrofoam Thickness. 20 Cm With Coefficient Λ = 0.033 [W/(M·K)] Finished With Silicone Plaster Along With Titanium - Zinc Flashings (Window Sills), - Dismantling The Existing Roof Covering, Replacing The Formwork, Strengthening The Structure With One-Sided Ceiling Beam Overlays And Insulating The Flat Roof With Thick Polystyrene. 20 Cm With A Coefficient Of Λ = 0.033[W/(M·K)] Together With A Two-Layer Covering Made Of Thermally Weldable Felt With A Total Thickness Of Min. 9.20 Mm And Replacement Of Sheet Metal Flashings, Gutters And Downpipes Made Of Titanium-Zinc Sheet, - Replacement Of All External Windows And Doors (Heat Transfer Coefficient U=0.9W/M2k), And Internal Door Joinery (Doors To The Utility Room, Basement, Vestibule And Doors To Residential Premises (Heat Transfer Coefficient For Doors To Residential Premises U=1.3 W/M2k) - Reconstruction Of The Sidewalk To The Building After Earthworks, Including The Replacement Of The Entrance Door Threshold (Radiated Granite, 3 Cm Thick) And