Request For Quotation Plastic For 3-D Printing

Petg Plastic. Polyethylene Terephthalate Glycol (Petg) Material Density Not Less Than 1.27 G/Cm³ Glass Transition Temperature (Tg) Not Less Than 75–80 °C Tensile Strength Not Less Than 45–53 Mpa, Tensile Modulus Of Elasticity Not Less Than 2.0–2.2 Gpa, Asa Plastic ~1.8–2.3 Gpa Impact Strength High Softening Temperature No Less Than 90–105 °C Net Weight No Less: 1000 G (1 Kg) Gross Weight No Less: ~1250 G, Abs Plastic. Acrylonitrile Butadiene Styrene (Abs) For 3D Printing Material Density No Less Than 1.04–1.05 G/Cm³ (Much Lighter Than Pla And Petg) Glass Transition Temperature No Less Than (Tg) 100–105 °C, Pla Plastic. Thermoplastic Biodegradable Polyester, Thread Diameter No Less Than: 1.75 Mm (Optional No Less Than 2.85 Mm) Net Weight No Less Than: 1000 G (1 Kg) Gross Weight No Less Than: ~1250 G Reel Material: Impact-Resistant Polystyrene / Polypropylene / Environmentally Friendly Pressed Cardboard, Plastic Tpu 85Atermoplastic Polyurethane Is An Elastomer That Combines The Properties Of Plastic And Rubber. An Index Of At Least 85A Indicates Shore A Hardness, Suitable For Printing Engineering Gaskets, Dampers, O-Rings, Belts, Rc Tires And Any Other Parts Where The Ability To Stretch, Shrink And Return To Its Original Shape Without Deformation Is Required.