Tenders Are Invited For Modernization Of The Facade Of The Front Building (...) And Adaptation Of A Room After A Service Premises In A Building Located In Tomaszów Mazowiecki At Al. March. Józefa Piłsudskiego 21

3. Part 1 – Modernization Of The Front Elevation From The Street. Piłsudskiego And The Gable Elevation From Ul. Zgorzelickaworks In Accordance With The Attached Design Documentation, Including: - Removal Of Unnecessary Metal Elements And Electrical And Telephone Cables, - Reconstruction Of The Shop Window And The Entrance Door To The Service Premises On The Ground Floor Of 2 Single Windows (U<0.9 W/M2k), With The Construction Of New Window Lintels And Necessary Brickwork, - Partial Replacement Of The Joinery On The Ground Floor, - Installation Of The Entrance Door From The Staircase To The Current One Commercial Premises Together With The Adjustment Of The Existing Opening (Penetration Coefficient For Doors U<1.3 W/M2k) - Renovation Of The Plinth With The Removal Of Secondary Plaster And Polystyrene Details, - Removal Of Secondary Plasters (Cement Plaster - Speckled), Maintaining The Existing Divisions (Beams In The Ground Floor), - Supplementation Of Flat Plasters, Cornices, Strips, Rustications, Pilasters And Plinth Of The Front Facade, - Supplementation Of Flat Plasters, Cornices And Facade Plinth (Drawn Or Perlite Rustications. The Ordering Party Does Not Consent To Styrofoam Rustications), - Supplementation Of Sheet Metal Flashings And Window Sills, - Cleaning And Completion Of Metal Stucco, With Painting Of Decorative Elements (Basement Gratings, Balustrades And Balcony Brackets), - Painting Of Facades And Architectural Details, - Cladding Of The External Steps Granite Slabs, - Painting With Filling Of Defects In The Facade, - Make All Stucco Details In Cream White Ncs S 0502-Y, - Facade Background In Cream White Ncs S 0502-Y, - Plinth In A Darker Shade Of Gray-Beige Ncs S 3005-Y20r, - Rustications And Pilasters - Light Gray-Beige Ncs S1505-Y20r, - Gutters, Downpipes, Flashings - Galvanized Steel Sheet, - Construction Of New Standard Steps Inside The Staircases (Stairs Leading To The Yard Made Of Prefabricated Elements), After Setting Up The Scaffolding And Obtaining Direct Access To The Facade Walls, The Plasters Should Be Assessed And The Decorative Details Should Be Inspected In Terms Of Their Additions, Repairs And Renovations. After Inspecting The Facade, The Contractor Should Prepare Photographic And Drawing Documentation Of Flat Plasters, Cornices, Pilaster Strips, Pilasters, Plinths, Window Frames, Rustications, Details (Rose Flower, Vine), Keystones And Make Templates For Drawn Profiles On A Scale Of 1:1. Then Remove All Unnecessary Metal Elements, Gratings And Installation Cables From The Facade. After Thoroughly Cleaning The Facade, Make Color Samples On The Facade (With An Area Of ​​1.0 M X 1.0 M) For The Final Selection Of The Color Shade By The Designer. Masonry Works: - Dismantle The Shop Window On The Ground Floor, - Brick Up The Opening To The Level Of The Target Window Sills After Removing The Entrance Door, - Make Klein Window Lintels Or Ready-Made Reinforced Concrete Ones. A Detailed Description Of The Subject Of The Ord