Request For Quotation Purchasing Spare Parts For Repairing A Zil Car

Bipod Steering Rod Assembly With Hinges For Zil-130. Article: 433360-3414011. Length (L): 560 Mm (In Some Catalogs The Overall Dimensions Are Indicated As 590–620 Mm). Weight: About 7.5 Kg. Contents: Supplied Assembled With Hinges (Tips). Purpose: To Ensure Precise Control And Synchronized Wheel Rotation. Compliance With St Rk Gost R 53489-2011 System Of Labor Safety Standards For Mounted And Trailed Agricultural Machines. General Safety Requirements. Warranty 1 Year From The Date Of Signing The Acceptance Certificate., Switch For Direction Indicators, Light And Sound Signal (Combined Steering Column Switch) With Wires Assembled Mtz 82.1. Article: Pkp/3912.3769-03. Rated Network Voltage: 12 V (Work In 24 V Systems Is Allowed). Contents: The Switch Is Supplied Assembled With An Integrated Bundle (Harness) Of Mounting Wires For Connection To The Standard Electrical System Of The Tractor Without The Need For Independent Soldering Or Modification Of The Connectors. Installation Type: Steering Column, On The Steering Column. Control And Operating Modes: Lever Mechanism For Switching Direction Indicators (Left/Right) With Fixation In Extreme Positions. Switching Headlight Operating Modes (Low/High Beam). Push-Button Or End-Mounted Horn Switch. Compliance With Gost 3940-84 Automotive Electrical Equipment. General Technical Conditions. Warranty 1 Year From The Date Of Signing The Acceptance Certificate., Cardan Shaft Crosspiece Zil-130, Article Number: 130-2201025. Main Technical Characteristics: Bearing Outer Diameter (D): 39 Mm. Bearing End Distance (H): 118 Mm. Cross Tenon Diameter (D): 25 Mm. Distance At The Ends Of The Studs (H): 108 Mm. Maximum Torque (Non-Destructive): 5880 Nm. Standard Size According To Gost: V (Fifth). Weight Of The Assembled Part: About 1.4 Kg. The Delivery Set Includes: Cross (Spider) - 1 Pc. Needle Bearing (Complete With Protective Seal And Sealing Ring) - 4 Pcs. Grease Fitting (Grease Fitting) Angled Or Straight - 1 Pc. (Screwed Into The Case Or Comes In A Separate Bag). Sealing Gaskets And Mounting Plates With Bolts. Compliance With Gost R 53602-2009 Components Of Vehicles. Marking. General Technical Requirements. 6 Month Warranty., No Tru Found. Original Suspension Bearing (Intermediate Support) Of The Zil-130 Propeller Shaft Assembly. Specifications: Must Strictly Comply With The Original Manufacturers Drawings. Part Number: 130-2202075. Design: Supplied Strictly Assembled. The Kit Includes: Steel U-Shaped Bracket (Clamp) For Fastening To The Frame Cross Member. Elastic Shock-Absorbing Cushion Made Of Wear-Resistant Rubber (Oil- And Petrol-Resistant, Resistant To Temperature Changes From -45°C To +60°C). Radial Single Row Ball Bearing (Type 114 / 6014). Set Of Protective Dirt And Dust Washers (Reflectors). Parameters: Inner Diameter: 70 Mm. Outer Diameter: 110 Mm. Bearing Width: 20 Mm. Weight Of The Assembled Unit: Not Less Than 0.95 Kg And Not More Than 1.15 Kg. Execution: Closed On Both Sides With Metal Or Rubber-Metal Seals (Type 2Rs / Pp) With Factory Lubricant For The Entire Service Life. Item Condition: The Item Must Be Brand New, Not Used, Not Refurbished, With No Signs Of Corrosion, Cracks, Deformation Of Metal Elements Or Hardening/Cracking Of The Rubber Cushion. Quality Of Materials: Metal Structural Elements Must Have A Protective Anti-Corrosion Coating (Primer, Polymer Or Zinc Coating). The Inner Ring Of The Bearing Should Rotate Smoothly, Without Jamming, Noticeable Play, Rolling Or Extraneous Noise. Compliance With St Rk Gost R 53489-2011 System Of Labor Safety Standards For Mounted And Trailed Agricultural Machines. General Safety Requirements. Warranty 1 Year From The Date Of Signing The Acceptance Certificate.