Request For Quotation Goods To Support Hospital Activities

Refined And Correct Characteristics: Installation For Cleaning Parts Using Ultrasound, Flock Velor For Upholstery Of Upholstered Furniture (Operblock), Medical Stand Pt-1 With One Basin With A Volume Of 9 Liters. It Has A Stable 5-Beam Base, Equipped With Rubber-Coated Swivel Wheel Supports Ø50 Mm, Which Ensure Easy Movement Of The Stand Within The Room. All Metal Parts Of The Stand And Basin Are Made Of Stainless Steel. The Frame Is Coated With A Polymer Powder Coating, Resistant To Various Disinfectant Solutions. The Basin Is Included., Vegetable Parchment, Grade A (For Sterilization Of Laboratory Glassware) Purpose: Designed For Packaging, Closing And Subsequent Sterilization Of Laboratory Glassware, Instruments, Bottles And Consumables In Steam Sterilizers (Autoclaves) And Air Sterilizers (Dry Heat Ovens). Quality And Standards: Compliance With Gost 1341-2018 (Or Equivalent) For Vegetable Parchment Grade A.Material: 100% Vegetable Parchment, Environmentally Friendly, Without Surface Sizing And Toxic Impurities. Should Not Emit Foreign Odors Or Chemicals When Heated. Density (Area Mass): Not Less Than 60 $G/M^2$ And Not More Than 64 $G/M^2$. Strength Properties: Has High Moisture Strength And Grease Resistance. Retains Mechanical Strength In A Wet State, Does Not Get Wet Or Deform Under The Influence Of Hot Water Steam Under Pressure (At Temperatures Up To +134°C) And Dry Hot Air (At Temperatures Up To +180°C). The Format Of Each Sheet Is 427 X 700 Mm. Supplied In 5 Kg Packs. (For Kdl), Brush For Washing Straws And Bottles. The Case Is Made Of Durable Stainless Steel. The Bristles Are Made Of Nylon. The Bristles Are Soft And Washable. The Length Of The Brush Is At Least 20 Cm. The Diameter Of The Tip Brush Is 0.5 Cm (For Cso), Plumbing Gloves, Coated (With Protective Coating)Purpose: Designed To Perform Plumbing, Plumbing, Repair And General Construction Work In Conditions Of High Humidity, Contact With Oily Substances, Dirt And Liquid Media. Provide Reliable Protection Of Hands From Mechanical Damage (Abrasion, Cuts, Punctures) And Chemically Non-Aggressive Liquids.Design And Base Material: The Base Of The Gloves Is Made Of Seamless Knitted Fabric (Cotton With Polyester Or Nylon), With A Knitting Density Of At Least 10–13 Gauze (Grade). The Presence Of An Elastic Cuff For Secure Fixation On The Wrist And Prevents Debris And Moisture From Entering The Glove.Coating Material (Pouring): Protective Layer Made Of High-Quality Material (Nitrile, Latex). The Coverage Is Complete (Sealed). The Coating Must Be Wear-Resistant, Elastic, Not Crack At Low Temperatures And Provide Reliable Grip On Slippery, Wet Or Oily Parts And Tools., Brush For Washing Straws And Bottles. The Case Is Made Of Durable Stainless Steel. The Bristles Are Made Of Nylon. The Bristles Are Soft And Washable. The Length Of The Brush Is At Least 20 Cm. The Diameter Of The Tip Brush Is 1 Cm (For Cso), Brush For Washing Straws And Bottles. The Case Is Made Of Durable Stainless Steel. The Bristles Are Made Of Nylon. The Bristles Are Soft And Washable. The Length Of The Brush Is At Least 20 Cm. The Diameter Of The Tip Brush Is 1.5 Cm (For Cso 7 Pcs, For Pdo 2 Pcs)., The Self-Tapping Screw With A Press Washer Is Sharp (For Wood And Thin-Sheet Materials), Galvanized. Technical Characteristics: Tip Type: Sharp, With A Special Thread For Reliable Fixation In Wooden Bases, Timber, Chipboard, Mdf, As Well As In Plastic Without Pre-Drilling. Head Shape: Semicircular With A Built-In Press Washer (Flange) To Increase The Clamping Area And Prevent Deformation Of The Materials Being Fastened. Spline Type: Phillips (Ph-2). Material: High-Strength Carbon Steel With Protective Anti-Corrosion Galvanized Coating. Dimensions: Diameter No Less Than 4.2 Mm, Screw Length - 32 Mm. Item Condition: New, Unused, Without Defects Or Signs Of Corrosion. Each Package Contains At Least 2000 Pieces., The Self-Tapping Screw With A Press Washer Is Sharp (Press Washer Without A Drill). Screw Length 38Mm. Each Package Contains At Least 1000 Pieces., Inner Tube With Tire For Wheelchair, Galvanized Steel Sheet. Designed For Construction, Installation And Repair Work. Made From Cold-Rolled Sheet Steel With A Protective Zinc Coating For Resistance To Corrosion And Weathering.Specifications:Material – Galvanized Sheet Steel;Width – 1000 Mm;Length – 1200 Mm;Sheet Thickness – 1.0 Mm;Surface – Flat, Smooth, Without Cracks, Delaminations, Burrs, Dents, Traces Of Corrosion And Other Mechanical Damage;The Zinc Coating Must Be Evenly Applied Over The Entire Surface Of The Sheet And Provide Reliable Protection Against Corrosion;The Sheet Should Be Easy To Machine (Cutting, Bending, Drilling) Without Compromising The Integrity Of The Protective Coating;Products Must Comply With The Requirements Of Gost 14918-2020 Or An Equivalent Regulatory Document;The Product Must Be New, Unused, Supplied In Original Packaging (If Available), With Manufacturers Markings, Date Of Manufacture And Confirmation Of Compliance With Established Requirements. (Application From The Caretaker), Refined And Correct Characteristics: Motor Oil For Diesel Engines Of Diesel Generator Sets. Intended For Use In Four-Stroke Diesel Engines Of Diesel Generator Sets. Mineral Motor Oil. Sae Viscosity Grade Is 30 (Or Equivalent As Required By The Engine Manufacturer). Api Operational Class – Not Lower Than Cc (Or Equivalent According To International Standards). Should Provide Lubrication Of Engine Parts During Operation Under High Load Conditions. It Has High Anti-Wear, Anti-Corrosion, Antioxidant And Detergent-Dispersant Properties. Provides Engine Protection Against The Formation Of Soot, Varnish Deposits And Sludge. Compatible With Diesel Engines Without Diesel Particulate Filter (Dpf). The Pour Point Is Not Higher Than Minus 18 °C. The Flash Point In An Open Crucible Is Not Lower Than +220 °C. Kinematic Viscosity At 100 °C Is In The Range Of 11.0–12.5 Mm²/S. Packaging: Canister With A Volume Of At Least 20 Liters. The Product Must Be New, Not Previously Used, In Original Sealed Packaging With Manufacturers Markings, Indicating The Date Of Manufacture And Shelf Life., Refined And Correct Characteristics: Internal Container With A Pedal Mechanism, 15 L With A Bag Lock, Red Color. Rectangular Shape, Material - Polyethylene/Polyethylene. Designed For Collection, Storage And Transportation Of Class B Medical Waste., Container With A Lid For Storing Medical Instruments. The Container Material Is Transparent Polypropylene. The Shape Is Rectangular. Volume 2 Liters., Container With A Lid For Storing Medical Instruments. The Container Material Is Transparent Polypropylene. The Shape Is Rectangular. Volume 1 Liter., Container (Tank), Plastic, With A Lid, For Collecting Dirty Laundry. Volume 50 Liters. The Handles Are Molded And Located At The Top Of The Container Directly Under The Rim. (Application By Kusbekova Zh.E.), Interior Mirror (For The Rehabilitation Department), Refined And Correct Characteristics: Ultrasonic Emitter With An Area Of ​​4 Cm², Power 4W. To Complete The Apparatus Uzt 1.3.01F (Iut 0.88-4.01.F Per 4 Cm²) (For The Physical Department), Bag For Storing And Carrying Tools (Application By D.I. Levenko)