Request For Quotation Horizontal Single-Stage Pumps Sd Are Designed For Pumping Wastewater, Both Domestic And Industrial

Horizontal Single-Stage Pumps Sd Are Designed For Pumping Wastewater, Both Domestic And Industrial, As Well As Other Contaminated Liquids. These Pumps Can Handle Liquids With A Ph Ranging From 6 To 8.5, A Density Of Up To 1050 Kg/M³, And A Temperature Of Up To 353 K (80 °C). They Effectively Pump Liquids Containing Abrasive Particles Up To 1% By Volume, The Size Of Which Does Not Exceed 5 Mm, With A Microhardness Of Up To 9000 Mpa. Sd Type Pumps Can Be Equipped With Both An Stuffing Box And A Mechanical Shaft Seal. Gray Cast Iron Is Used To Manufacture Parts Of The Flow Path, Which Provides The Necessary Strength And Resistance To Loads Arising During Operation. These Pumps Are Ideal For Applications That Require Reliability And Durability When Pumping Dirty And Abrasive Fluids. The Main Feature Of The Sd Pump Is Its Ability To Effectively Handle Liquids That Have Impurities Or Low Flow Rates, Which Makes It Indispensable In Situations Where Continuous And Stable Movement Of Liquid Is Required. This Is Especially Important In Systems Where Short-Term Interruptions In Supply Are Possible, For Example, When Emptying Tanks Or During Operation Of Pumping Stations. The Operating Principle Of Such A Pump Is To Use Centrifugal Force To Create Pressure, Which Sets The Liquid In Motion. This Allows Sd Pumps To Provide High Performance In A Relatively Compact Size, Which Is Ideal For Installation In Confined Spaces. To Be Approved By The Customer 87025286815, 87716959092, Magnetic Starters Up To 40 Amperes. Electromagnetic Starters Pml 1100, Pml 2100, Pml 3100, Pml 4100 (Magnetic Starters Pml, Contactors Pml) Are Designed For Starting And Stopping Asynchronous Motors With A Squirrel-Cage Rotor. They Are Used In Conveyors, Machine Tools, Compressors, Pumps, Elevators, Escalators, Heat Guns, Heating, Ventilation And Air Conditioning Control Systems, Etc., Automatic Transfer Transfer Systems, As Well As For Switching Lighting Networks. If There Is A Thermal Relay, The Starter Protects The Controlled Electric Motor From Overloads And From Currents Arising When One Phase Is Broken. To Be Approved By The Customer 87025286815, 87716959092, Electromagnetic Starters Of The Pm12 Series Are Designed For Remote Starting By Direct Connection To The Network, Stopping And Reversing Three-Phase Asynchronous Electric Motors With A Squirrel-Cage Rotor For Voltages Up To 660 V Ac 50 And 60 Hz. If There Are Thermal Relays, The Starter Protects Controlled Electric Motors From: Overload Of Currents Arising When One Of The Phases Breaks, Asymmetry Phases. Starters Pm12 100-250 -Ip00, Ip20* Starters Are Distinguished By High Mechanical And Switching Wear Resistance, Which Ensures A Long Service Life Even Under Conditions Of Intensive Use. Meets The Gost Requirements For Industrial Devices, Ensures High Operating Reliability. No Noise And Increased Operational Reliability. Simplicity Of Design And High Reliability, Tested By Time Of Operation. Pm12 100-250 Starters In Housing - Ip40, Ip54* Simplicity Of Design, High Reliability, Tested By Time Of Operation; Meets Gost Requirements For Industrial Devices And Ensures High Operational Reliability; High Load Switching Capacity In General Industrial Modes Ac-3; Greater Switching Life And Wear Resistance. The Presence Of A Protective Housing Provides A High Degree Of Protection Ip40, Ip54. The Product Must Be Agreed With The Customer Before Delivery!!!!!!!!!!!!!!!!!!!!!!!, Brass Ball Valve Handle Lever And Butterfly Internal/Internal. To Be Approved By The Customer 87025286815, 87716959092, Flange Type: Flat, Flange Material: Steel, Nominal Diameter: 50Mm, Working Medium: Water, Gas, Steam, Air, Steam-Water Mixture, Liquid Medium, Aggressive Medium, Working Pressure: 25 Bar, Warranty Period: 1 Year. Steel Slip-On Flange For Pe Sleeve From D32 To D1200. We Also Produce Special Flanges According To Your Drawings. St-Kz To Be Agreed By The Customer 87025286815, 87716959092, 3 Way Valves. Thread Diameter: 1/2, Material: Brass, Connection: Threaded, Area Of Application: Water Supply, Heating, Depth: 50Mm, Weight (Without Packaging): 0.201 Kg, Three-Way Valve Aquasfera 012-0095 Is Designed For Connecting A Working Pressure Gauge To Heating Systems, Cold And Hot Water Supply In Utility And Drinking Networks And Industrial Technological Pipelines. The Model Is Equipped With A Flange For A Pressure Gauge. The Body And Stop Plug Are Made Of High-Quality Hot-Pressed Brass, The Washer, Screw And Nut Are Made Of Structural Steel, The Seal Is Made Of Polytetrafluoroethylene. To Be Approved By The Customer 87025286815, 87716959092, Steel Bends With Coupling And Lock Nut Dn 65 Mm Assembled And Other Plumbing Fittings For Pipes. To Be Approved By The Customer 87025286815, 87716959092, Cast Iron Valve Du-100 (Ru-16) Diameter (Mm): 100 Pressure: 16 Atm Length (Mm): 230 Working Medium: Water, Steam Number Of Holes: 8 Diameter Of Holes (Mm): 18 Weight (Kg): 30.5 Gate Valve 30Ch6br Is Designed For Installation As A Shut-Off Device On Pipelines. Delay Type 30Ch6br-Parallel With A Retractable Spindle. Connection To The Pipeline Is Flanged. Installation Position Is Any, Except For The Position With The Flywheel Down. The Working Medium Can Be Supplied From Either Side Of The Valve. The Operating Medium Temperature Is No More Than +225 C. The Total Average Service Life Is At Least 10 Years. To Be Approved By The Customer 87025286815, 87716959092