Quotation Are Invited For Tools And Machinery

Quotation are invited for Tools and Machinery Delivery Date: 2026/11/30 Delivery To: Shane Nethenzheni Scientific Services, Waste water Avenue, Delivery Address: 0 Off Jan Smuts Drive, Athlone, ATHLONE Closing Date: 2026/10/02 Closing Time: 12:00 PM Description: 2 each x 12v 100ah lithium battery 2 each x 12vbattery charger Specification: * SPECIFICATIONS 2 x 12V 100Ah Lithium Battery 1280Wh. Dimention of a battery should be approximately 307x169x208mm. Should contain ultra safe lithium iron phosphate cells, intergrated battery management system (BMS), more than 2000 cycle longer service life, should be able to be drained 100%, light weight and compact, LCD battery Voltage amd capacity gauge, should be water and dust resistant (IP65), highly durable sealed ABS plastic enclosure, sealed amd non-liquid (No fumes, no leakage and should be mounted in any position). approximate weight of 12kg. Operating temperature ranging from 0 to 45oC (charge), -20oC (discharge), ABS plastic casing material, atleast 3 years/ 3000 cycles warranty, operating voltage range of 12.8V. LiFePO4 chemistry 12.8V nominal voltage 100Ah capacity (1280Wh minimum) Integrated Battery Management System (BMS) Minimum 3,000 charge cycles Minimum 2-year warranty Dedicated LiFePO4 smart charger (14.4V to 14.6V charge profile) Contact Person: Shane Nethenzheni [email protected] Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference will be deemed to be accompanied by the words "or equivalent The Municipal Bidding Document 6.1 (MBD 6.1) is attached, in order to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with each and every RFQ submission, failure to submit may result in zero point allocation, including BBBEE to verify points claimed. NB!!! PLEASE ENSURE THAT YOU ATTACH THE TECHNICAL DATA SHEETS AND PICTURES OF THE ITEM QUOTED ON, TO YOUR RFQ SUBMISSION****FAILURE TO ADHERE TO THIS REQUIREMENT, MAY RESULT IN YOUR OFFER BEING NON-RESPONSIVE**** *** PLEASE ENSURE THAT ALL REQUIRED INSURANCES SUCH AS YOUR PUBLIC LIABILITY, EMPLOYERS LIABILITY OR COIDA AND MOTOR VEHICLE INSURANCE ARE ATTACHED AND THAT THEY ARE UP-TO-DATE. IF YOU UTILISE COURIERS AND DO NOT HAVE MOTOR VEHICLE INSURANCE, THEN PLEASE MENTION THIS. ALSO ENSURE THAT YOUR UPDATED DECLARATION OF INTEREST AND BBBEE IS ATTACHED AT ALL TIMES*** * 1 x 12V Lithium Battery Charger:a 12V 20A Industrial Portable Battery Charger. it should be able to charge Lithium Battery and other range of of batteries. Capable of wide AC input voltage range (not sensitive to variations). LED light to indicate charger status LED ie. Red flash (error), Red (charging ), Yellow (almost full), Green (Full). IP65 and Fan IP68 charger waterproofing rating. SA 3 point plug input connector and Red Anderson output connector. Input voltage range of 90 - 264VAC, 50 Hz input frequency, 5A Input Current, 3 phase charging (pre-charge, Constant current and constant voltage), Output Power (830 W Max), Output Voltage (27.6 VDC Max), Output Current (30 A Max), Output Current Ripple (500mAp-p Max), Weight (3.15kg), Operating temperature (-20 to 50oC), operating humidity (up to 100%), protection (Short Circuit, over voltage, Over Temperature and Reverse Polarity) LiFePO4 chemistry 12.8V nominal voltage 100Ah capacity (1280Wh minimum) Integrated Battery Management System (BMS) Minimum 3,000 charge cycles Minimum 2-year warranty Dedicated LiFePO4 smart charger (14.4V to 14.6V charge profile) Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/329653