Quotation Are Invited For Custom Benches - As Per Spec

Quotation are invited for Custom Benches - as Per Spec Delivery Date: 2026/12/11 Delivery To: Roads Planning EBENEZER ROADS & STORMWATER DEPOT Delivery Address: 1 Ebenezer Road at intersection of Dock Road, Cape Town Closing Date: 2026/10/08 Closing Time: 10:00 AM Description: 1 each x custom benches - as per spec Specification: * *** This is a rates based RFQ*** The manufacture, assembly, supply and delivery of custom benches is to be undertaken as indicated on the attached Timber Block Bench Details drawing: LA-SG-WA-TD-LD-200, as follows: 6.1 Galvanised steel brackets: 2 Number Steel 6mm plate brackets per bench, joints welded to form "U" with the dimensions of 335mm high x 270mm wide x 120mm deep. A steel 6mm plate welded to the centre of each bracket to provide stability, with the dimensions 90mm high X 258mm wide. 2 pairs of aligned holes with dimensions of 14mm diameter set at 60mm centres from the top of the bracket for M12 threaded rod. 2 holes at bracket base plate to be 18mm diameter for M16 threaded rod base anchors. Steel brackets to have smooth edges and be free of any damage. Brackets to be hot-dip galvanised as complete units to ensure galvanised finish. 6.2 Seat fixing: The bracket is fixed to timber seat block by M12 galvanised steel threaded rods with galvanised steel dome cap nuts and flat washers. All nuts to be tack welded after final tightening. 6.3 Timber block seat: Cladocylex (Sugar Gum) timber block to act as bench seat, with a dimension of 1500mm long x 300mm wide x 300mm deep. Timber surface to have a sanded and oiled finish. 10mm chamfers on all top edges. 4 number recesses with the dimensions 200mm high x 130mm wide and 25mm deep for the placement of the bench brackets with 4 number 14mm diameter holes to match brackets, to be drilled through to fit the M12 threaded rods. Timber seat finish is to be free of splinters, chips and cracks. CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the supplier#s commercial position (including joint venture agreements), preferencing arrangements, or samples of materials, considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned may be declared non-responsive. # Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent" # NB: The Municipal Bidding Document 6.1 (MBD 6.1) is attached, in order to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with each and every RFQ submission, failure to submit will result in zero point allocation. Delivery of benches to Ebenezer Roads & Stormwater Depot, Ebenezer Road at intersection of Dock Road, Cape Town City Centre. Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/329678