Tenders Are Invited For Preparation Of Design And Cost Estimate Documentation For A Zero-Emission Building (Zeb Standard): Construction Of An Office Building For The Needs Of The Arimr District Office In Gryfice Along With Authors Supervision

The Subject Of The Order Is A Service Consisting In The Preparation Of Complete, Multi-Discipline Design And Cost Estimate Documentation For The Construction Of A New Zero-Emission Office Building (Zeb - Zero Emission Building) In Accordance With The Requirements Of The Epbd 2024 Directive. The Investment Is Located On Part Of Plot No. 25 At Ul. Niekładzka In Gryfice. The Documentation Is To Constitute The Basis For Awarding An Order For Construction Works In A Separate Tender Procedure. Construction Address: Plot No. 25/2, Gryfice-1 District, Id No. Plots 320502_4, Gryfice Commune-Miasto, Gryfice Poviat, Voivodeship West Pomeranian Voivodeship, Ul. Niekładzka, Gryfice.Key Formal And Spatial Conditions:• Purpose And Dimensions: Office Building. The Size Of The Development Area Is Up To 400.00 M². The Width Of The Front Elevation Is Up To 30.00 M. The Height To The Attic/Cornice Is Up To 4.5 M, And The Total Height To The Ridge Is Up To 6.00 M.• Roof Geometry: Steep Gable Or Multi-Slope Roof Or Flat Roof With A Slope Angle Of 10-45°.• Building Line: The Applicable Building Line Is 20.00 M From The Street Side. Niekładzka.• Infrastructure And Communication: Communication Services Directly From The District Road No. 3114Z (Ul. Niekładzka) Via An Exit, The Construction Design Of Which Must Be Prepared Before The Commencement Of Construction Works. 20 Parking Spaces Should Be Designed On The Plot.• Area Development: Water Supply: From The Existing Water Supply Network Built By The Gryfice Commune In Ul. Niekładzka. Collection Of Sanitary Sewage Into The Existing Sanitary Sewage System. Discharge Of Rainwater To The Plots Own Area (May Require A Water Permit). • Power Connection To The Enea Operator Network Or Equivalent. Openbim Technological Standard: • Design Documentation Must Be Fully Coordinated And Created Using Digital Building Data Modeling (Bim) Technology In Openbim Standards. The Geometry And Information Class Must Precisely Correspond To The Established Log / Loi Levels And The Matrix Of Required Attributes Contained In The Opz. General Requirements: • The Ordering Party Requires That The Deadline For Completion Of The Subject Of The Order Does Not Exceed December 15, 2026. The Implementation Of The Subject Of The Order Is Considered Complete, Excluding Obtaining A Water Permit (If Applicable) And A Building Permit. • All Design And Implementation Solutions Require The Full Acceptance Of The Ordering Party At Every Stage Of Order Execution. • Parallel Development And Consultation With The Ordering Party Of Subsequent Stages Of Calculations Of The Design Energy Performance And Technical Design Is Required. • It Is Required To Take Into Account In The Design The Impact Of Solutions On The Design Energy Performance Of The Facility. • All Design Assumptions, Balance Calculations, Etc. Should Be Made And Approved By The Ordering Party In The First Place, Before Issuing Any Part Of The Design Documentation. • In The Building, Due To Its Nature,