Request For Quotation Products For Organization (Electrode)

Mp-3 Electrodes Are Intended For Manual Arc Welding Of Ordinary And Critical Structures Made Of Carbon Steel, When Increased Demands Are Placed On The Formation Of Seams In Various Spatial Positions. Type Of Electrode: J422, Type Of Coating: Rutile, Diameter (Mm): 3.2 Length (Mm): 350, Welding Current Strength (A): 70-110, Position Of Seams When Welding: Ra, Pb, Rs, Pf, Pg, Pe, Pd, Welding Mode: Welding Is Carried Out With Direct Current Of Any Polarity (Reverse Is Recommended, “+” On Electrode) Or Alternating Current From A Transformer With An Open Circuit Voltage Of At Least 50 V. Purpose: For Welding Structural And Low-Alloy Steels. Mainly Used For Manual Arc Welding Of Supporting (Load-Bearing) Structures Made Of Low-Carbon And Low-Alloy Steel Of Normal Strength, Such As Q235 (St.3), 09Mnv (09Gf), 09Mn2 (09G2)., Mp-3 Electrodes Are Intended For Manual Arc Welding Of Ordinary And Critical Structures Made Of Carbon Steel, When Increased Demands Are Placed On The Formation Of Seams In Various Spatial Positions. Type Of Electrode: J422, Type Of Coating: Rutile, Diameter (Mm): 2.5 Length (Mm): 350, Welding Current Strength (A): 70-110, Position Of Seams During Welding: Ra, Pb, Rs, Pf, Pg, Pe, Pd, Welding Mode: Welding Is Carried Out With Direct Current Of Any Polarity (Reverse Is Recommended, “+” On Electrode) Or Alternating Current From A Transformer With An Open Circuit Voltage Of At Least 50 V. Purpose: For Welding Structural And Low-Alloy Steels. Mainly Used For Manual Arc Welding Of Supporting (Load-Bearing) Structures Made Of Low-Carbon And Low-Alloy Steel Of Normal Strength, Such As Q235 (St.3), 09Mnv (09Gf), 09Mn2 (09G2).